dfisk Posted October 30, 2015 Author Report Share Posted October 30, 2015 Can the new Nomad Stingray bag which also looks very nice accommodate the FP8? Yes. The FP8 and even the RX12 will fit in the bag. Quote Link to comment Share on other sites More sharing options...
Jack Norflus Posted October 30, 2015 Report Share Posted October 30, 2015 Thanks Jack yes a right angle USB extension cable might help to some extent, (rather than an adaptor in order to keep the profile as minimal as possible), though I foresee the necessity of sticky tape to try to ensure the Zaxcom cable doesn't get pulled out of the extension. However as the Nomad touch cable is a specialised USB to Serial cable (with components built in) provided by Zaxcom as part of the Touch package (as I understand it), it would be nice to not have to immediately have to resort to an extension cable in an attempt to make the tablet USB connection less vulnerable to damage, ie. the Zaxcom special Touch cable came with a USB right angle already fitted. Might that be possible do you think? I believe it has something to do with the components in the cable - and there aren't low profile cables that could accommodate them. Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted October 30, 2015 Report Share Posted October 30, 2015 a quick note about right angle adapters. A lot of the will point towards the back and make it impossible to use in a bag. You have to find the once that face inside the nomad. Quote Link to comment Share on other sites More sharing options...
Christopher Salazar Posted October 31, 2015 Report Share Posted October 31, 2015 Hey Everyone! We are excited to announce some new products from Sound Guys Solutions. First is our TM1 tablet mount. This is designed to hold a small tablet in your audio bag. The top flips over so you camera can shoot video of the timecode on the screen. It's designed to work with the Nomad Touch and Movie Slate for the whole flip over purpose, but any small tablet can go on here. You just mount it with velcro. Magnets hold the top in place, and you just push the top of the tablet to flip it over on the hinge. We'll have a video shortly, but here's the info on our site. http://www.sound-guys.com/#TABLET MOUNTS Second, are our new Lav-Bullet/Lav-Rod adapters. If you have a Lectro Lav-Bullet or Lav-Rod but have lavs wired for other wireless systems these adapters will allow you to use your existing Lectro Lav-Bullet with a lav with a 3 pin lemo, threaded Sennheiser lav, or Lectro HM/MM lav. http://www.sound-guys.com/#LAV-BULLET%2FLAV-ROD_ADAPTERS These are all available right now. Okay, so how can I get a tablet holder? I can't find any available at your dealers. Quote Link to comment Share on other sites More sharing options...
Michael Miramontes Posted October 31, 2015 Report Share Posted October 31, 2015 (edited) Also would be nice if Zaxcom could source right angle full size and mini USB for the cables, they're just so vulnerable? +1000000000000 But just declaring that the product "...is just... Not very smart..." is not useful. I guess he can look at the bright side. If he keeps making comments like that then he'll eventually get enough people telling him to F'off, which will then lead to him doing so, which will then lead to a thread with those same people begging for him to come back... Edited October 31, 2015 by Michael Miramontes Quote Link to comment Share on other sites More sharing options...
dfisk Posted November 1, 2015 Author Report Share Posted November 1, 2015 Okay, so how can I get a tablet holder? I can't find any available at your dealers. We've been diligently shipping them out, so dealers should have them in stock or on their way. Give them a call and ask them. Quote Link to comment Share on other sites More sharing options...
efksound Posted November 7, 2015 Report Share Posted November 7, 2015 Thanks Jack yes a right angle USB extension cable might help to some extent, (rather than an adaptor in order to keep the profile as minimal as possible), though I foresee the necessity of sticky tape to try to ensure the Zaxcom cable doesn't get pulled out of the extension. However as the Nomad touch cable is a specialised USB to Serial cable (with components built in) provided by Zaxcom as part of the Touch package (as I understand it), it would be nice to not have to immediately have to resort to an extension cable in an attempt to make the tablet USB connection less vulnerable to damage, ie. the Zaxcom special Touch cable came with a USB right angle already fitted. Might that be possible do you think? +++1Specially when you consider the retail price of a pair of cables and app. and that the price of the Nomad Touch when first announced was 200$ Quote Link to comment Share on other sites More sharing options...
ao Posted November 18, 2015 Report Share Posted November 18, 2015 +++1Specially when you consider the retail price of a pair of cables and app. and that the price of the Nomad Touch when first announced was 200$ perhaps these folks have a suitable cable. I have bought from them in the past: http://www.angledcables.com Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.