rcoronado Posted November 20, 2015 Report Share Posted November 20, 2015 So, has 3d printing come to the point yet where we can design and create entire shock mounted and wind protection rigs with various multi mic configurations? I saw a thread a while back that had a person custom 3D printing various mic clips, and it seems like the next step would be to modify the designs that Rycote and Cinela put out to adapt to some more esoteric or compact designs that incorporate both wind protection AND shockmounting. I'm thinking of things like ORTF mounts for longer mics that have shock mounting built in and enough room for cables to attach internally quad rigs rigs with attachment ports for TWO mic stands that can support heavier mics collapsible rigs (rigs that fold down flat and then pop back out into boxes or other shapes) rycote ball gag competitors dual MS rigs etc. The tricky part for all of that stuff tends to be the physical construction of the cage. Once that's designed and produced, its just a matter of wrapping it in an appropriate fabric and implementing the rubber bands for the shock mount. Seems doable. right? Quote Link to comment Share on other sites More sharing options...
Abe Dolinger Posted November 20, 2015 Report Share Posted November 20, 2015 Short answer: yes, but it's hard. The filaments I've worked with are either too brittle or too flexible to be an obvious solution. The shape of the printed object also suggests using dissolvable support structures in the print, which is more expensive and time-consuming. It's beyond my capabilities at the moment. That said, this is one of a few areas I'm looking to expand to. So maybe I'll have more to report after I get some time to experiment. Quote Link to comment Share on other sites More sharing options...
dfisk Posted November 20, 2015 Report Share Posted November 20, 2015 3D printing is good for prototyping, but still a LONG way off when it comes to finished products. I've been down this road. The materials and durability just aren't there yet. Even then, the good 3D printers you need for solid prototypes are very expensive. We're not talking about the ones you can get in the store these days. I'm talking about temperature controlled professional units. Plus, 3D printing just takes too long. If I can do injection molding vs. 3D printing, I'll take injection molding any day. I can make many more parts injection molding than I can in the same amount of time for the same part in 3D printing. Quote Link to comment Share on other sites More sharing options...
Glen Deakin Posted November 20, 2015 Report Share Posted November 20, 2015 Cinela!!! Quote Link to comment Share on other sites More sharing options...
Olle Sjostrom Posted November 20, 2015 Report Share Posted November 20, 2015 I still have dreams about your zeppelin Dave. I realized back then the 3D printing part was probably just a fantasy, but it was and still is a great idea. Skickat från min E5823 via Tapatalk Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted November 20, 2015 Report Share Posted November 20, 2015 there is noting you can not do! I have experimented with 3d printing but gave up. the problem is bigger 3d printers are expansive. Quote Link to comment Share on other sites More sharing options...
chriskellett Posted November 20, 2015 Report Share Posted November 20, 2015 the problem is bigger 3d printers are expansive. and expensive too. Quote Link to comment Share on other sites More sharing options...
laurenbanjo Posted November 20, 2015 Report Share Posted November 20, 2015 there is noting you can not do! Note to self: I can not do ;) Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted November 20, 2015 Report Share Posted November 20, 2015 (edited) you get the idea. Correcting my spelling and grammar is not needed.waist of time. Edited November 20, 2015 by RadoStefanov Quote Link to comment Share on other sites More sharing options...
rcoronado Posted November 20, 2015 Author Report Share Posted November 20, 2015 @RadoStefanov its the fact that you edited the post above that makes it so great. Quote Link to comment Share on other sites More sharing options...
Michael Miramontes Posted November 20, 2015 Report Share Posted November 20, 2015 I still have dreams about your zeppelin Dave. I realized back then the 3D printing part was probably just a fantasy, but it was and still is a great idea. What you guys do behind close doors is your business. LOL Quote Link to comment Share on other sites More sharing options...
Olle Sjostrom Posted November 20, 2015 Report Share Posted November 20, 2015 LOL! That one's on me. Happy Friday! Quote Link to comment Share on other sites More sharing options...
Christian Spaeth Posted November 20, 2015 Report Share Posted November 20, 2015 Who said sound folks aren't the better comedians? Quote Link to comment Share on other sites More sharing options...
dfisk Posted November 20, 2015 Report Share Posted November 20, 2015 I still have dreams about your zeppelin Dave. I realized back then the 3D printing part was probably just a fantasy, but it was and still is a great idea. Skickat från min E5823 via Tapatalk We did a lot of 3D prototype printing, and it was great for that, but those parts would not hold up in the real world under normal use. Plus, as Rado said, the high end 3D printers are expansive. Quote Link to comment Share on other sites More sharing options...
Olle Sjostrom Posted November 20, 2015 Report Share Posted November 20, 2015 Yeah I totally understand. I hope it does resurface again. The general design was great! Quote Link to comment Share on other sites More sharing options...
IBH Posted November 22, 2015 Report Share Posted November 22, 2015 (edited) I've had good success 3D printing APE balls for my Dpa4060s. I was actually surprised they worked, since I thought the materials used to make the balls for DPA's 4006/11s was important in their effectiveness. I was able to get about +8db and a boost at around 7K+ Edited November 22, 2015 by IBH Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.