Srgtfury Posted March 6, 2016 Report Share Posted March 6, 2016 Hi ALL! The goal is to maintain existing TC, present in poly files, input to ProTools, through RX5 connect, for processing, back to PT and thence bounced to a stereo file. The poly files have; mix, boom and 4 Isos. Also, Rx5Adv has a Module Chain in place to custom, lightly process nearly all the tracks, from all the files,but this is laborious with approximately 150 files and Izotope's 2 track per pass limit. Any helpful ideas appreciated. Finally, what is the best method, considering the above, to maintain the original TC, through the finished, bounced, stereo files? Thank you very much Fury Quote Link to comment Share on other sites More sharing options...
Constantin Posted March 6, 2016 Report Share Posted March 6, 2016 Is there an advantage to using RX5 stand-alone instead of as a plugin? Handle length? Quote Link to comment Share on other sites More sharing options...
Philip Perkins Posted March 6, 2016 Report Share Posted March 6, 2016 When you export your worked-on file from RX make sure "preserve non-audio data" is checked in the export window. That will make the exported copy have the same metadata TC as the orig clip, and thus will snap to the correction position in your project. Quote Link to comment Share on other sites More sharing options...
Srgtfury Posted March 6, 2016 Author Report Share Posted March 6, 2016 Hi Phil! Thanking... Also, any opinion on running a module chain on the raw, poly wav files as a batch, given that the plugins contained in the chain are desired, before going into PT? BTW, To keep the Timecode as on the native wav files, what are the settings in proTools as well, please, to avoid defaulting to 1.00.00.00? Thank you very much Fury Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.