RadoStefanov Posted August 11, 2016 Report Share Posted August 11, 2016 R.A.D.O SuperMaxx project SuperMaxx will be: Zaxcom Maxx with TX for hop block 21 QRX235 and QRX235QIFB with zaxnet 4 channel wireless lavs Internal 4 Cell Inspired Energy ND2034 3.4Ah 49Wh R.A.D.O OneUnit common carbon fiber shell with XLRs rerouted to the side for smaller and easier bagging. I am aiming at 4 pounds total weight including the bag and battery. micplexer in the picture is just for size! Quote Link to comment Share on other sites More sharing options...
Philip Perkins Posted August 11, 2016 Report Share Posted August 11, 2016 Rockin'. Standing by for further developments. Will that internal battery power the RX as well? Good idea re new location for XLRs. Maybe add 2 for inputs 5/6? Or wire 2 from your RX internally to 5/6 permanently? Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted August 11, 2016 Author Report Share Posted August 11, 2016 28 minutes ago, Philip Perkins said: Rockin'. Standing by for further developments. Will that internal battery power the RX as well? Good idea re new location for XLRs. Maybe add 2 for inputs 5/6? Or wire 2 from your RX internally to 5/6 permanently? I am powering everything off one battery. RX will be AES only. No plans on 5/6 unless mozegear finish their 2xg soon. I like to leave 5/6 open because I use it for phone conversations. Quote Link to comment Share on other sites More sharing options...
AnuarYahya Posted August 11, 2016 Report Share Posted August 11, 2016 You are a brave pioneer. much respect. how and where are you going to make space for the side xlr's? Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted August 11, 2016 Author Report Share Posted August 11, 2016 1 hour ago, AnuarYahya said: how and where are you going to make space for the side xlr's? I only need 2 xlrs . I was thinking in place of the XLR output or on top of the ta5s. Quote Link to comment Share on other sites More sharing options...
AnuarYahya Posted August 11, 2016 Report Share Posted August 11, 2016 nice. Quote Link to comment Share on other sites More sharing options...
Carlos Maeda Posted August 12, 2016 Report Share Posted August 12, 2016 I'm always in amazement of your work, Rado. Curious about the carbon fiber shell. I'm sure that piece alone will make a dramatic difference. Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted August 12, 2016 Author Report Share Posted August 12, 2016 I got 7:45 hours recording and morroring 4 tracks with phantom engaged on 1 boom mic and TX enabled and transmitting Quote Link to comment Share on other sites More sharing options...
Erik Loderstedt Posted August 16, 2016 Report Share Posted August 16, 2016 I am powering everything off one battery. RX will be AES only. No plans on 5/6 unless mozegear finish their 2xg soon. I like to leave 5/6 open because I use it for phone conversations. Ever consider Audioroot, Femto or uPre? Skickat från min SM-G930F via Tapatalk Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted August 16, 2016 Author Report Share Posted August 16, 2016 27 minutes ago, Erik Loderstedt said: Ever consider Audioroot, Femto or uPre? Skickat från min SM-G930F via Tapatalk nope. I consider mozegear. They know how to make gear that works good with wireless. Quote Link to comment Share on other sites More sharing options...
Erik Loderstedt Posted August 17, 2016 Report Share Posted August 17, 2016 nope. I consider mozegear. They know how to make gear that works good with wireless. Ok... Ive own a Femto, used it with G3, Wisycom and Micron, no issue what so ever. For extra inputs to my Maxx, on 5/6 so I get fast control over the gain.Skickat från min SM-G930F via Tapatalk Quote Link to comment Share on other sites More sharing options...
Jason Todd Posted August 22, 2016 Report Share Posted August 22, 2016 I like the idea of the Mozegear. I wish there was a way that you could use it with the Maxx for two extra faders while retaining your prefade iso tracks. Quote Link to comment Share on other sites More sharing options...
Jason Todd Posted August 23, 2016 Report Share Posted August 23, 2016 How are you planning to distribute power? Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted August 23, 2016 Author Report Share Posted August 23, 2016 power wire. Quote Link to comment Share on other sites More sharing options...
Jason Todd Posted August 23, 2016 Report Share Posted August 23, 2016 So are you adding turning the hirose connector on the Maxx into an output or something? Or is it all going to be wired internally inside the Maxx? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.