Jump to content

Adapting TA-5F Audiotechnica AT898 to Sennheiser G2/G3


Cedric Akins

Recommended Posts

I've made adapters for many mics to be used with Sennheiser G series wireless. The 3.5 mm side is always the same, positive to the tip & ground to the sleeve. As an example for TA5 wired for Lectro you'll need a male TA5 wired as follows. Jump pins 2 & 4 with the ground to pin 1 and positive to pin 3.

Link to comment
Share on other sites

I have had the shop @ LSC make me various lav adapters (Lectro connectored Countryman>Shure TX, Shure connectored DPA to Lectro TX) and they worked fine, not very expensive, very fast turnaround.  I had mine made kind of short (6"), you might consider having the adapter cable be longer so you can stow the "join" better and not have it dangling.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...