Matt Martin Posted April 25, 2017 Report Share Posted April 25, 2017 What makes you think that? From the tech specs on DPA's website. http://www.dpamicrophones.com/microphones/dscreet/slim-4060-omnidirectional-microphone"Power supply (for full performance)Min. 5 V to max. 50 V through DPA adapter for wireless systems, 48 V phantom power ±4 V with DAD6001 XLR adapter"So 50v max sounds like it would be able to handle anything the zmt could throw at it. Quote Link to comment Share on other sites More sharing options...
VASI Posted April 25, 2017 Report Share Posted April 25, 2017 ZMT-PH has no NeverClip; dynamic range it's 114 dB Max 75mW aux output power Does the ZMT-HM has NeverClip? Quote Link to comment Share on other sites More sharing options...
John Blankenship Posted April 25, 2017 Report Share Posted April 25, 2017 (edited) Zaxcom's intent with the new 48v transmitter and the new antenna-less plugon is as devices intended to address specific applications. For stick mic use, the 743 is sometimes a tad bulky and the antenna is sometimes considered a nuisance, so the new plugon is designed specifically for that application. Definitive real world tests haven't been forthcoming yet, but Glenn guesses that it might get about half the range as it's sibling -- but when a stick mic is employed, usually range isn't an issue. The little 12v./48v. unit is designed specifically for pole use where its light weight and form factor can allow you to use a lighter, uncabled pole. Early reports from beta testers is quite favorable for this little unit. Neither is designed as an all-purpose device. Re DPA lav voltage: Please note the words, "through DPA adapter". Edited April 25, 2017 by John Blankenship Quote Link to comment Share on other sites More sharing options...
Matt Martin Posted April 25, 2017 Report Share Posted April 25, 2017 Re DPA lav voltage: Please note the words, "through DPA adapter". I might be fine with an adapter depending on the size. Does anyone know what that particular dpa adapter might be?I would most likely only use this as a backup bodypack but it would be great to have it be dual purpose in that way. Assuming the voltage can be taken care of, is there any other reason this can't be used as a talent pack? Quote Link to comment Share on other sites More sharing options...
Jeff Wexler Posted April 25, 2017 Report Share Posted April 25, 2017 It is my understanding that the ZMT version plug-on (the one with an XLR connector) was designed to provide a news reporter style plug-on to be used with the typical EV RE-50 microphone. It utilizes an antenna system that uses the body of the transmitter and the microphone which does result in reduced range. In this case, range is assumed to not really be an issue for it's intended use. The ZMT - Phantom (Lemo connector) is the one that is really designed specifically for the boom and is not to be used with a lav. It has an external antenna to provide maximum range which should be very good aided by the transmitter's position up in the air on the mic end of the fishpole. Quote Link to comment Share on other sites More sharing options...
John Blankenship Posted April 25, 2017 Report Share Posted April 25, 2017 Glenn has done testing that resulted in almost no "battery hit" when using 12v. boom mics. However, 48v. is an entirely different story. What some people don't realize is that 48v. mics actually draw very little current, however, DC to DC converters, required in the transmitter to boost a low voltage to 48v., are inefficient devices and that's where the "battery hit" occurs. Quote Link to comment Share on other sites More sharing options...
Constantin Posted April 25, 2017 Report Share Posted April 25, 2017 I might be fine with an adapter depending on the size. Does anyone know what that particular dpa adapter might be? Yes, it will be the 48V XLR adapter, which takes 48V and converts it to 5V for the mic. Might not be suitable in this case. I have to admit, though, the wording on the DPA site is not very clear Quote Link to comment Share on other sites More sharing options...
max Posted April 25, 2017 Report Share Posted April 25, 2017 1 hour ago, John Blankenship said: Glenn has done testing that resulted in almost no "battery hit" when using 12v. boom mics. However, 48v. is an entirely different story. What some people don't realize is that 48v. mics actually draw very little current, however, DC to DC converters, required in the transmitter to boost a low voltage to 48v., are inefficient devices and that's where the "battery hit" occurs. So hypothetically, one should run a miniCMIT with the ZMT at 12v, right? Assuming no other noise floor issues, which may not be the case. Quote Link to comment Share on other sites More sharing options...
Constantin Posted April 25, 2017 Report Share Posted April 25, 2017 So hypothetically, one should run a miniCMIT with the ZMT at 12v, right? Assuming no other noise floor issues, which may not be the case. Look at the specs. There will be some issues Quote Link to comment Share on other sites More sharing options...
Wandering Ear Posted April 26, 2017 Report Share Posted April 26, 2017 I love the look of the PH version. I currently love the function of my 742, and 3.5-4 hours on rechargables is just enough to not really bother me. I have always found the 742 to be too heavy to be supported by the xlr alone. This looks like a great step up for wireless boom. Quote Link to comment Share on other sites More sharing options...
AnuarYahya Posted April 26, 2017 Report Share Posted April 26, 2017 I think i'll still use a regular TRX with a separate 48v power box for the boom. This setup is a bit heavier but you have another transmitter plus Neverclip. (which i like to have on the boom, just in case) I would really like it if zaxcom add to the line of tiny black boxes a 48V power supply with no transmitting capabilities. It could even be the exact same box. I think it could be more affordable, and have longer battery times. Quote Link to comment Share on other sites More sharing options...
Jack Norflus Posted April 26, 2017 Report Share Posted April 26, 2017 21 hours ago, Matt Martin said: What would be the limiting factors for not being able to use it as a body pack transmitter? I know the voltage only goes down to 12v which excludes using a cos-11 (it needs to see less than 10v) but was hoping a dpa could work (as it seems to be able to handle up to 48v). Also, some sort of external inline adapter would hopefully be able to knock down the voltage for lav use. Any other reasons I'm not thinking of It's not a voltage thing - its that the ZMT phantom is wired as a balanced input. Quote Link to comment Share on other sites More sharing options...
Nate C Posted April 26, 2017 Report Share Posted April 26, 2017 To be honest I'd like to see NeverClip implemented into the ZMT Phantom but I assume it isn't possible to fit all that magic into such a small box. With such a light and small TX, look forward to seeing my American brothers and sisters enjoy why so many of us prefer to have the TX at the business end of the boom pole. Quote Link to comment Share on other sites More sharing options...
Matt Martin Posted April 26, 2017 Report Share Posted April 26, 2017 It's not a voltage thing - its that the ZMT phantom is wired as a balanced input. Makes sense. Thanks Jack! Quote Link to comment Share on other sites More sharing options...
soundslikejustin Posted April 26, 2017 Report Share Posted April 26, 2017 10 hours ago, Nate C said: To be honest I'd like to see NeverClip implemented into the ZMT Phantom but I assume it isn't possible to fit all that magic into such a small box. With such a light and small TX, look forward to seeing my American brothers and sisters enjoy why so many of us prefer to have the TX at the business end of the boom pole. I'd like to see Neverclip in the +48v version if it means it's at the expense of the Zaxnet transmit function i.e.: it can still RX tc and gain control but loses the ERX monitor function. How much space those two functions take up respectfully / if that's even possible I have no idea, but I personally would find the unit more attractive that way. Quote Link to comment Share on other sites More sharing options...
DanieldH Posted April 27, 2017 Report Share Posted April 27, 2017 On 25.4.2017 at 0:44 PM, Matt Martin said: Also, some sort of external inline adapter would hopefully be able to knock down the voltage for lav use. Ambient should have an Eumel for Microdot and probably for whatever might be hard-soldered to fit your other TX. But would a simple resistor, DIYstyle do? Quote Link to comment Share on other sites More sharing options...
PTA Posted April 27, 2017 Report Share Posted April 27, 2017 22 hours ago, soundslikejustin said: I'd like to see Neverclip in the +48v version if it means it's at the expense of the Zaxnet transmit function i.e.: it can still RX tc and gain control but loses the ERX monitor function. How much space those two functions take up respectfully / if that's even possible I have no idea, but I personally would find the unit more attractive that way. I agree Neverclip would have been nice especially for the HM version. I'm thinking specifically on a few jobs where I have had a stand-up comedy presenter go from almost whispering to full out yelling. Neverclip shines in scenarios like this. Quote Link to comment Share on other sites More sharing options...
patrickveigel Posted April 27, 2017 Report Share Posted April 27, 2017 I would also really like to see Neverclip on the unit. If there's any possibility. That's the feature I love my 743s for and a feature I've always found lacking on my 942. Quote Link to comment Share on other sites More sharing options...
mateuf Posted June 13, 2017 Report Share Posted June 13, 2017 if there was neverclip in the phantom version, it would be such a nobrainer for wireless boom work. maybe it is also without neverclip. so small and light. are these transmitters already out in the wild for real world feedback ? Quote Link to comment Share on other sites More sharing options...
Ze Frias Posted June 14, 2017 Report Share Posted June 14, 2017 23 hours ago, mateuf said: if there was neverclip in the phantom version, it would be such a nobrainer for wireless boom work. maybe it is also without neverclip. so small and light. are these transmitters already out in the wild for real world feedback ? Save for a few beta units, I believe they start shipping next week. The unit I tested sounded amazing, never clip or not. I think it's a no brainer regardless. Quote Link to comment Share on other sites More sharing options...
fieldmixer Posted June 18, 2017 Report Share Posted June 18, 2017 To be clear, these units can transmit zaxnet audio to an erx?? Quote Link to comment Share on other sites More sharing options...
glenn Posted June 18, 2017 Report Share Posted June 18, 2017 Yes they do. Quote Link to comment Share on other sites More sharing options...
fieldmixer Posted June 20, 2017 Report Share Posted June 20, 2017 That is pretty darn cool. Thanks Glenn. Quote Link to comment Share on other sites More sharing options...
fieldmixer Posted June 20, 2017 Report Share Posted June 20, 2017 I'd like to see Neverclip in the +48v version if it means it's at the expense of the Zaxnet transmit function i.e.: it can still RX tc and gain control but loses the ERX monitor function. How much space those two functions take up respectfully / if that's even possible I have no idea, but I personally would find the unit more attractive that way. Makes you wonder if the zaxnet tx componts can fit in here with everything else, why oh why is it not in maxx!! Arg!![emoji23] Quote Link to comment Share on other sites More sharing options...
John Blankenship Posted June 20, 2017 Report Share Posted June 20, 2017 1 hour ago, fieldmixer said: ... Makes you wonder if the zaxnet tx componts can fit in here with everything else, why oh why is it not in maxx!! Arg!! It doesn't make me wonder at all -- apples and oranges. The Zaxnet Transmitters in the wireless transmitters are of extremely low power output, designed only for close distance monitoring. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.