locationsoundvie Posted October 4, 2017 Report Share Posted October 4, 2017 Hi, I just watched the Lectrosonics Range Test from Matt Price and was impressed by the range he got out of his system. I am using the LMB and SRC, frequencies are coordinated and a scan has been done, also the gain on the TX tickles the red LED as suggested by Lectro but my setup with LMB/SRC would have quite noticeable problems with getting the signal as of the distance shown at 0:30-0:40 in the video. Even in line of sight. That problem occurs with all my TX and RX (all LMBs and SRCs). And there is always slight amount of high frequency hiss pumping with the signal on both even with the NR set to FULL. Any hints how to get this range out of the Lectros. I would never get that far with it even when I am on a high position, Quote Link to comment Share on other sites More sharing options...
LarryF Posted October 4, 2017 Report Share Posted October 4, 2017 Quick answer without knowing anything else is: Get your gain up to where you are "tickling the red leds" then, and only then, set the gain for the rest of your system. Best, Larryf Quote Link to comment Share on other sites More sharing options...
Spin360 Posted September 3, 2021 Report Share Posted September 3, 2021 We're you able to find the source of the problem? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.