KGraham045 Posted November 13, 2017 Report Share Posted November 13, 2017 How do you keep your coiled cable headphones from becoming a tangled mess? Quote Link to comment Share on other sites More sharing options...
mark kirchner Posted November 13, 2017 Report Share Posted November 13, 2017 I rewired my with straight cable. Quote Link to comment Share on other sites More sharing options...
Eric Toline Posted November 13, 2017 Report Share Posted November 13, 2017 Same as I do and I rewire 3-4 sets a month for the local mixers here. Quote Link to comment Share on other sites More sharing options...
Glen Trew Posted November 13, 2017 Report Share Posted November 13, 2017 Here are two replacement cables for Sony MDR-7506, made with production sound in mind. Shorter than the original Sony cable, and won't tangle: https://www.trewaudio.com/product/remote-audio-7506sc/ https://www.trewaudio.com/product/remote-audio-7506cc/ Quote Link to comment Share on other sites More sharing options...
daniel Posted November 13, 2017 Report Share Posted November 13, 2017 1 hour ago, KGraham045 said: How do you keep your coiled cable headphones from becoming a tangled mess? Embrace the tangled mess or only having enough of it outside of the bag to reach you head and keep all the other cables tidy. I like having a long HP cable, as there are times when it's useful. Quote Link to comment Share on other sites More sharing options...
afewmoreyears Posted November 14, 2017 Report Share Posted November 14, 2017 I try really hard to keep the coiled cable nice...On the cart I use all the cable I can going around my CL12 and into my 688, not to the front of the CL-12...when my cable gets funky, I buy another pair... or, send to the bag rig...Usually 2 years or so... The bag I do what has been suggested above.. keep most of it tucked away safely.. I prefer the coiled cable due to me sometimes walking away with my headphones on...the coiled cable is a bit more forgiving... Quote Link to comment Share on other sites More sharing options...
Dave Pullmer Posted November 14, 2017 Report Share Posted November 14, 2017 This is a good trick, I've done it to a few pairs of mine Quote Link to comment Share on other sites More sharing options...
ronmac Posted November 14, 2017 Report Share Posted November 14, 2017 Dave, thanks for that simple, yet effective, trick. Just reached over the desk, grabbed my pair and gave it a go. I am a fan of the Audio Technica ATHM50x, partly because of the 3 sets of detachable cables (curly cord, straight cord with regular adaptable 1/8">1/4" plug and shorter straight cord with slim 1/8" plug that fits the smaller gap in cell phone cases) they include in the package. Quote Link to comment Share on other sites More sharing options...
Laurence Posted November 14, 2017 Report Share Posted November 14, 2017 Dave Pullmer... yes! I've been doing that to all of mine since my first pair in the early 90's. Takes a few minutes to rig it up and problem solved. Highly recommend it. Quote Link to comment Share on other sites More sharing options...
Dave Pullmer Posted November 14, 2017 Report Share Posted November 14, 2017 Not my trick! But i was really happy to find that a while back myself - puts the cable at the perfect length for your ifb while booming/utility or mixing out of the bag. A small bit of extra weight on the cable but I don't mind it. Quote Link to comment Share on other sites More sharing options...
Jan McL Posted November 14, 2017 Report Share Posted November 14, 2017 15 hours ago, Dave Pullmer said: This is a good trick, I've done it to a few pairs of mine That video was made at my request by the estimable PSM Paul Pouthier who thanks NYC PSM Tom Varga for the idea. Glad it's getting around. Quote Link to comment Share on other sites More sharing options...
David Waelder Posted November 14, 2017 Report Share Posted November 14, 2017 Bruce Bisenz employed, I think, the best solution to the unruly cable problem. He rewired all of his headsets to incorporate a permanent yoke that "Y-d" down to a connector. He had a number of cables that he might attach to that Y-connector - straight, coiled, mono and stereo. The connector provided a weak point that could pop before a cable would be stressed to the breaking point and aging or compromised cables could be easily replaced in the field. Of course, he is handier than I with a soldering gun - an essential skill as the Sony cables employ Litz wire (or something very similar). My own solution is less elegant but has worked well for me. I simply thread a length of nylon climbing line through the coils to limit the expansion of the coiled cable. By affixing the nylon line with O-rings at each end, I provide some slack to prevent damage when coming to the end of the line. This is similar to the clever rerouting employed by Dave Pulmer and others but may be easier to undo. David Quote Link to comment Share on other sites More sharing options...
chrismedr Posted November 14, 2017 Report Share Posted November 14, 2017 1 hour ago, David Waelder said: My own solution is less elegant but has worked well for me. I simply thread a length of nylon climbing line through the coils to limit the expansion of the coiled cable. By affixing the nylon line with O-rings at each end, I provide some slack to prevent damage when coming to the end of the line. very interesting... how about using some rubbery stretchy thin rope instead of the nylon one? Quote Link to comment Share on other sites More sharing options...
Dave Pullmer Posted November 14, 2017 Report Share Posted November 14, 2017 5 hours ago, Jan McL said: That video was made at my request by the estimable PSM Paul Pouthier who thanks NYC PSM Tom Varga for the idea. Glad it's getting around. Thanks for sharing it! Quote Link to comment Share on other sites More sharing options...
Glen Trew Posted November 14, 2017 Report Share Posted November 14, 2017 Here's another video I found while looking for relevant content Quote Link to comment Share on other sites More sharing options...
bilagaana Posted November 15, 2017 Report Share Posted November 15, 2017 I've spent 40 years with Beyer DT48s with a coiled cable and just take care of them. Never wind them around the phones. My phones get the cable dropped into a drawer or compartment in my bag like I was doing the anchor line on a boat. Then the phones nest on the coiled cable. I've shipped them half-way-around the World like that and it seems to work out. I never have buggered coiled cables. Quote Link to comment Share on other sites More sharing options...
Glen Trew Posted November 15, 2017 Report Share Posted November 15, 2017 Replace the Beyer cable with the Sony cable and see what happens. Quote Link to comment Share on other sites More sharing options...
jgbsound Posted November 16, 2017 Report Share Posted November 16, 2017 I did this to mine. Now, I can plug in any straight 3.5mm stereo cable into it. I use a 3.5mm/1/4" adapter. John Quote Link to comment Share on other sites More sharing options...
The Immoral Mr Teas Posted November 16, 2017 Report Share Posted November 16, 2017 The cable is the only thing I like about my 7506's. I may be missing Glen's joke but I've often thought of rewiring my DT150 with one. I pack my 7506 folded, upside down and chuck the cable over the top - the only time the cable was wrapped around the phones was when I lent them to a friend (who wanted to experience for himself just how bloody horrible they sound). J Quote Link to comment Share on other sites More sharing options...
jason porter Posted November 16, 2017 Report Share Posted November 16, 2017 I like the 7506 cable as well. It spends most of the time tucked into my bag, but I can release some coil when I need it. Quote Link to comment Share on other sites More sharing options...
Glen Trew Posted November 16, 2017 Report Share Posted November 16, 2017 Wrapping the Sony cable around the headphones is a sure way to age the cable quickly, of course. Keep in mind that the Sony cable was built for comfort, not speed and is not well suited for the rigors of production sound, particularly in "run-and-gun" bag productions. The Beyer DT-48 coiled cable was much tougher, I suppose to ensure the pain of wear them for a lifetime. Quote Link to comment Share on other sites More sharing options...
The Immoral Mr Teas Posted November 18, 2017 Report Share Posted November 18, 2017 On 16 November 2017 at 6:57 PM, Glen Trew said: (snip) The Beyer DT-48 coiled cable was much tougher, I suppose to ensure the pain of wear them for a lifetime. Thanks for the reminder of this Glen! It's been a couple of decades since I've been around the venerable 48. If I'm able to source a DT48 spare cable from Beyer I might well use it to construct a coiled cable for my DT150s (of course I'll have to find a suitable screwable 3.5/6mm stereo jack plug for the other end - what with the box at the other end this might get quite pricey). Jez (edit - the WK100.07 replacement cable might save me a lot of grief at a straight 32 euro purchase ... Not sure that it's quite the same heavy duty cable Glen was referring to for the old DT 48 though - I had a vague memory of something slightly wider and thicker) Quote Link to comment Share on other sites More sharing options...
soundtrane Posted November 18, 2017 Report Share Posted November 18, 2017 here's some internet genius at work (all in jest, my post here) Quote Link to comment Share on other sites More sharing options...
ryanpeds Posted November 19, 2017 Report Share Posted November 19, 2017 I wonder how well it works in reverse? Quote Link to comment Share on other sites More sharing options...
Glen Trew Posted November 19, 2017 Report Share Posted November 19, 2017 5 hours ago, soundtrane said: here's some internet genius at work (all in jest, my post here) Yep. Here's a secret in what makes the commercial coiled cables tighter: Put an end into a power drill and reverse the coil all the way down. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.