nickreich Posted August 17, 2018 Report Share Posted August 17, 2018 Has anyone sourced a Line Socket (to go on a cable rather than a panel) that mates with the Lemo connector used on mics wired for pro-series Sennheiser, Zaxcom, or Lectro SSM transmitters? Even Lemo's online tech support seem confused by which model matches the keyways etc. If you've found one that works, can you please share the model number? I need to make some adapters for mics wired for Senn Lemo, to plug into Lectrosonics PDRs. I can't swap or re-wire the mics. I've seen the Kortwitch solid-body adapters that Gotham sells, they work but the overall length of the plug plus adapter is a problem sticking out the top of the pack, so I'd prefer to make adapters with an inch of cable in between so they can fold back down the side of the TX. Thanks, nick Quote Link to comment Share on other sites More sharing options...
SeeKai Posted August 17, 2018 Report Share Posted August 17, 2018 PFB.00.303.CLAD32 or something to that effect, your lemo dealer should be able to correct it. I use these to build adapters all the time and they work great! Quote Link to comment Share on other sites More sharing options...
nickreich Posted August 17, 2018 Author Report Share Posted August 17, 2018 Thanks for that, I'll look it up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.