Eric Toline Posted August 21, 2018 Report Share Posted August 21, 2018 Looking to find 760k right angle co-axial power connectors with screw on locking collars for Zaxcom RX units. Either connectors only or molded on 18" to 24" length. Anyone? Quote Link to comment Share on other sites More sharing options...
John Blankenship Posted August 21, 2018 Report Share Posted August 21, 2018 Contact Gene or his brother at Sound Guys Solutions. Keep in mind that the RX200 receivers use a Switchcraft equivalent 760K length, (shorter), while the QRX200, and the previous RX900 receivers use a 761K length equivalent. SGS makes cables with either. I don't know if they offer unterminated versions (please let me know when you find out). Quote Link to comment Share on other sites More sharing options...
drpro Posted August 21, 2018 Report Share Posted August 21, 2018 Eric plenty of them out there of the molded variety, Digikey has several here is one catalog number to get you started 839-1015-ND. Here is another at Mingston http://www.mingston.com/productdetail15.htm. Somewhere I found some long cables with the right angle locking on both ends, cut the cable in half, two for one plus a dollar. Don't remember the link for that one. Enjoy David Quote Link to comment Share on other sites More sharing options...
Eric Toline Posted August 21, 2018 Author Report Share Posted August 21, 2018 1 hour ago, drpro said: Eric plenty of them out there of the molded variety, Digikey has several here is one catalog number to get you started 839-1015-ND. Here is another at Mingston http://www.mingston.com/productdetail15.htm. Somewhere I found some long cables with the right angle locking on both ends, cut the cable in half, two for one plus a dollar. Don't remember the link for that one. Enjoy David Thanks David but I found the exact assembly I was looking for from Gene Martin at Sound Guys Solutions. Quote Link to comment Share on other sites More sharing options...
bilagaana Posted August 27, 2018 Report Share Posted August 27, 2018 Eric, I'm still thankful for the right-angle XLR's that you made for me years ago. They have lasted and lasted. I hope I didn't shoot myself in the foot for saying that! Quote Link to comment Share on other sites More sharing options...
Eric Toline Posted August 28, 2018 Author Report Share Posted August 28, 2018 1 hour ago, bilagaana said: Eric, I'm still thankful for the right-angle XLR's that you made for me years ago. They have lasted and lasted. I hope I didn't shoot myself in the foot for saying that! Damn, now you put the hex on them. Thanks for the kind words. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.