PTA Posted September 15, 2018 Report Share Posted September 15, 2018 So today I encountered something I’ve never seen on my SRb. I was using them in dual mode and everything was working fine. Talent left set with their TXs still on, out of range, and then came back to set. Channel 2 had mysteriously stopped passing audio. I thought it was the Tx, but I tuned channel 1 to channel 2’s freq and it was picking it up fine. The odd thing is when I go to the channel 2 freq page on the SRb, the number is flashing, channel 1 doesn’t do this and my other SRbs don’t do this regardless if they are picking up a Tx signal or not. It’s not a pilot tone thing or compatibility thing. What does this flashing frequency mean? To add to the oddness, I powered it on and off many times which didn’t help. Once I got home and powered it up again, it is fine, flashing stopped. Any ideas? Quote Link to comment Share on other sites More sharing options...
Zack Posted September 15, 2018 Report Share Posted September 15, 2018 Following Quote Link to comment Share on other sites More sharing options...
Dean Slotness Posted September 17, 2018 Report Share Posted September 17, 2018 The blinking switch setting indicator is a Phase-Locked Loop error. There are several possible faults to cause this problem. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.