Jump to content

ta5f line hookup (servo and non servo)


alidav

Recommended Posts

18 hours ago, Eric Toline said:

For the TA5F it is. The TA 3 could also represent an XLRF and the wiring is the same. Note that the ground pin 1 is jumped to 3 in the TA3 are tied together making this an unbalanced connection. Follow Lectro's wiring and you'll be fine.

 

you mean the 7 one? https://www.lectrosonics.com/Support/Microphone-Wiring/uhf-transmitter-5-pin-input-jack-wiring.html ?

 

pin 1 and 3 are jumped together also. 

what confuses me is that the wiring, in any case, doesn't seem to be balanced.
pin 2 (hot ) goes on 5 and pin 3 (cold) goes always jumped to the ground (pin 1) so at end we have a sort of 2 wire connections, like the sennheisers evolutions.
 

Link to comment
Share on other sites

19 hours ago, Eric Toline said:

For the TA5F it is. The TA 3 could also represent an XLRF and the wiring is the same. Note that the ground pin 1 is jumped to 3 in the TA3 are tied together making this an unbalanced connection. Follow Lectro's wiring and you'll be fine.

eric this is a your answer given in another discussion,  and is more clear to me.
since i am going from the x1-x2 on sound devices 664/688
 

"From what connection on the 788 to Lectro TX line in? If the output on the 788 is a balanced connection then it's pin 1 to pin one for the ground. Pin 2 on the the TA3 to pin 5 on the TA5 for line in. Pin 3 on the TA3 goes to pin 3 on the TA5 for line level.

 

Eric"

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...