alidav Posted December 10, 2018 Report Share Posted December 10, 2018 we have 2 sd 668 -664 to sync to each other and both have both a lemo - bnc cable, do you think if joining them via a BNC/BNC female adapter, it going to work? Quote Link to comment Share on other sites More sharing options...
nickreich Posted December 10, 2018 Report Share Posted December 10, 2018 It depends on how your two Lemo to BNC cables are wired, if you have one timecode out cable and one timecode in cable, then joining them with a BNC 'barrel' (female-female) cable as you suggest will work, but only in one direction. If both the cables are wired the same, it won't. This is because, unlike a Tentacle Sync with it's 3.5mm jack, the Lemo connector uses different pins for TC in and TC out. Quote Link to comment Share on other sites More sharing options...
alidav Posted December 10, 2018 Author Report Share Posted December 10, 2018 we had the proper cable bought from the production, lucky us. Quote Link to comment Share on other sites More sharing options...
Boomboom Posted December 10, 2018 Report Share Posted December 10, 2018 Well, dots being your recorders… ●--tc--> not <--tc--● not ● <--tc-- --tc--> ● not ● --tc--> --tc--> ● yes! yes! ● <--tc-- <--tc-- ● Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.