Alan D Gerhardt Posted February 4, 2019 Report Share Posted February 4, 2019 Just unpacked and tested my two new Phantom2 transmitters. Using 3 Volt phantom powering and COS11D's, I find that I have to dial in more gain than needed with my ZMT3.6. Using the same lav on both units, I find that in order to get the same level at the recorder I crank up to 27 on the ZMT3 and 39 on the ZMT Phantom2. Is this what the rest of you are experiencing? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
withintheflux Posted February 6, 2019 Report Share Posted February 6, 2019 yep. That's normal. It's a different circuit, I'm told. It won't match the other ZMTs Quote Link to comment Share on other sites More sharing options...
Derek H Posted February 7, 2019 Report Share Posted February 7, 2019 Is it noisier? Quote Link to comment Share on other sites More sharing options...
Alan D Gerhardt Posted February 7, 2019 Author Report Share Posted February 7, 2019 Is it noisier? Not that I noticed; but I was just checking levels. I'll have another listen and report back.Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
dtrg Posted June 9, 2020 Report Share Posted June 9, 2020 On 2/7/2019 at 6:37 PM, Alan D Gerhardt said: Not that I noticed; but I was just checking levels. I'll have another listen and report back. Sent from my iPhone using Tapatalk Hi Alan, How did you get on? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.