Jump to content

DCHT/M2R routing issue


Dalilamahimself

Recommended Posts

I am running into a frustrating issue with my new set up and I haven’t been able to find out Much about it on line because the DCHT is so new.  I know I’m doing something wrong and hopefully someone here can point me in the right direction. 

 

I am trying to route just the boom to my boom op and the mix to my director - both of whom are monitoring through M2R’s. 

 

I am using a 788t with a CL-9. The DCHT is plugged into outputs 1 and 2. 

 

Right now I am trying to route all this through the 788 routing menu. 

 

Originally I routed all the inputs to the right channel and the boom to the left channel. 

 

Then on the M2R of the boom op I used the balance menu to balance to the Left side only. 

 

On the M2R of the boom op in the mix menu I set the mono left + right so the boom op hears just the left channel in both headphones. 

 

But when I change the mix on the cl-9 it’s still registering in the boom ops ears.  Even though the routing on the 788 only routes to boom to the left channel. 

 

I’m sure I’m doing something simple and wrong.  Any ideas of what it could be? 

 

 

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...