drpro Posted February 5, 2021 Report Share Posted February 5, 2021 Yep, I would say they have been toking the Kali Tragus, know by many names, prickly Russian thistle, being one one of them Quote Link to comment Share on other sites More sharing options...
Syoung Posted June 26, 2021 Report Share Posted June 26, 2021 On 2/24/2020 at 9:13 PM, RocketTreeAudio said: I have a DSQD in a bag with a 633 hooked up to some SNA600s. How's the power draw in the bag? Guessing it's on a separate batt than the 633. What batts are you using and what kind of time are you getting out of it? Also, can you turn off unused channels and if so does it affect the power draw? TIA Quote Link to comment Share on other sites More sharing options...
Eric Lau Posted October 10, 2021 Report Share Posted October 10, 2021 On 8/8/2019 at 7:30 PM, Michael Wynne said: The location of the two BNC antenna inputs, XLR /Dante outputs, and power is less ideal for a bag workflow and will be cumbersome, A slot mount SRB,SRC,A10, etc solves all that. And my guess is that with the digital winds of change the tumbleweeds will be bringing more to the slot mount design in the digital world such as the speculated SRD. I hoping the new machine to do that, Lectrosonics Octopack has AES output, Sound device SL2 has 4 SRC slot,… etc. Quote Link to comment Share on other sites More sharing options...
Mark Posted October 12, 2021 Report Share Posted October 12, 2021 Any more news in these units in a bag? would love to hear more about how it performs. how it compares to a 411? etc Quote Link to comment Share on other sites More sharing options...
Constantin Posted October 12, 2021 Report Share Posted October 12, 2021 5 hours ago, Mark said: Any more news in these units in a bag? would love to hear more about how it performs. how it compares to a 411? etc Can‘t really compare it to a 411 anymore as I‘ve sold all mine. In my opinion the 822 outperforms my DSQD but I love them both. I have them both in a bag and I‘m relly happy with this setup. I have 10 channels of wireless receivers in my bag without any rf distro. Quote Link to comment Share on other sites More sharing options...
Mark Posted October 12, 2021 Report Share Posted October 12, 2021 Thanks Constantin, nice bag. I have an 888 and have been considering the DSQD. Am still using 411 which are extremely reliable, but 4 channels and Dante sure is tempting. Quote Link to comment Share on other sites More sharing options...
Jim Rillie Posted October 12, 2021 Report Share Posted October 12, 2021 4 hours ago, Constantin said: Can‘t really compare it to a 411 anymore as I‘ve sold all mine. In my opinion the 822 outperforms my DSQD but I love them both. I have them both in a bag and I‘m relly happy with this setup. I have 10 channels of wireless receivers in my bag without any rf distro. Without any RF distro? How so? Quote Link to comment Share on other sites More sharing options...
Allen Rowand Posted October 12, 2021 Report Share Posted October 12, 2021 1 hour ago, Jim Rillie said: Without any RF distro? How so? My guess: antennas into SL-2, out to DSQD, then DSQD out to 822 or some variation. Both the SL-2 and DSQD have antenna loop-throughs. Quote Link to comment Share on other sites More sharing options...
Jim Rillie Posted October 12, 2021 Report Share Posted October 12, 2021 Aha. Didn’t recognize SL2. Quote Link to comment Share on other sites More sharing options...
Constantin Posted October 12, 2021 Report Share Posted October 12, 2021 Yes, exactly like Allen said Quote Link to comment Share on other sites More sharing options...
Eric Lau Posted October 14, 2021 Report Share Posted October 14, 2021 On 10/13/2021 at 12:37 AM, Allen Rowand said: My guess: antennas into SL-2, out to DSQD, then DSQD out to 822 or some variation. Both the SL-2 and DSQD have hope that is work. For example, i try Antenna to DSQD to Octopack, Gordon Moore said they are not commend bands and have internal filtering , he suggested use passive splitter from antenna to Octopack and DSQD. Quote Link to comment Share on other sites More sharing options...
Constantin Posted October 15, 2021 Report Share Posted October 15, 2021 On 10/14/2021 at 2:32 AM, Eric Lau said: hope that is work. For example, i try Antenna to DSQD to Octopack, Gordon Moore said they are not commend bands and have internal filtering , he suggested use passive splitter from antenna to Octopack and DSQD. It does work of course, as long as you consider the bands of your devices. It doesn’t matter which RF devices you try to conmect their RF ranges must always overlap Quote Link to comment Share on other sites More sharing options...
sicijk Posted February 10, 2022 Report Share Posted February 10, 2022 Hello. I'm curious to know if Vector Diveristy makes a real difference when in Digital Hybrid using analog tx (HM, SMB, LT). I already have SRb,411a,Venue2. I am in for an offer on a non-vector enabled unit (looking at its serial). From the manual I read that Vector Diversity makes good improvement when using digital transmission since it makes less awful the audio result when both antenna receives badly. I'm really in a hurry prior to start next job (in 20 days) and this offer jumped on me yesterday. Thanks in advance for any insight! Quote Link to comment Share on other sites More sharing options...
Johnny Karlsson Posted February 10, 2022 Report Share Posted February 10, 2022 Vector diversity only works with fully digital transmitters (not hybrid ones). Also note that vector diversity uses two of the channels. Quote Link to comment Share on other sites More sharing options...
sicijk Posted February 10, 2022 Report Share Posted February 10, 2022 Thanks Johnny, I knew about the diversity using 2 receivers for one channel. But not aware that Vector is only for full digital... Thanks again Quote Link to comment Share on other sites More sharing options...
karlw Posted February 10, 2022 Report Share Posted February 10, 2022 6 hours ago, Johnny Karlsson said: Vector diversity only works with fully digital transmitters (not hybrid ones). Also note that vector diversity uses two of the channels. Vector Diversity is available in digital and Hybrid modes in the DCR822 and in the DSQD V2. I would say, though, that Vector yields more of an improvement over standard ratio diversity when using digital modes. Quote Link to comment Share on other sites More sharing options...
Johnny Karlsson Posted February 10, 2022 Report Share Posted February 10, 2022 55 minutes ago, karlw said: Vector Diversity is available in digital and Hybrid modes in the DCR822 and in the DSQD V2. I would say, though, that Vector yields more of an improvement over standard ratio diversity when using digital modes. Oops, my bad. Sorry about that sicijk. Thank you for correcting my mistake, Karl ! Quote Link to comment Share on other sites More sharing options...
Jobo Posted February 16, 2022 Report Share Posted February 16, 2022 What is the difference if any in DSQD V2 and V1? When did V2 drop onto market? Wondering if Brian ever got his HMa issue resolved ? The thread kind of went away from DSQD reviews for a sec Quote Link to comment Share on other sites More sharing options...
audiofp Posted February 17, 2022 Report Share Posted February 17, 2022 One downside is it's not built for the rigors of a bag so I put my DSQD and 822 in a Rack-N-Bag ... Quote Link to comment Share on other sites More sharing options...
Mark Posted February 18, 2022 Report Share Posted February 18, 2022 That’s a great rack n bag rig. Nice one. can you post a couple more photos please? I just ordered mine today. How are you finding it? Quote Link to comment Share on other sites More sharing options...
Jobo Posted February 18, 2022 Report Share Posted February 18, 2022 Love that mini-stack design. Very slick. Would love to see the cable runs on the backside! Quote Link to comment Share on other sites More sharing options...
audiofp Posted February 28, 2022 Report Share Posted February 28, 2022 A little pricey but I've enjoyed the access, even in the field. Removing the outer bag is quick. Quote Link to comment Share on other sites More sharing options...
codyman Posted February 28, 2022 Report Share Posted February 28, 2022 12 minutes ago, audiofp said: A little pricey but I've enjoyed the access, even in the field. Removing the outer bag is quick. Does make it very clean and organized. My bag's cable management certainly does not look like that! Quote Link to comment Share on other sites More sharing options...
johngooch Posted March 10, 2022 Report Share Posted March 10, 2022 On 2/16/2022 at 1:46 PM, Jobo said: What is the difference if any in DSQD V2 and V1? When did V2 drop onto market? Wondering if Brian ever got his HMa issue resolved ? The thread kind of went away from DSQD reviews for a sec I'd like to know the as well --- Quote Link to comment Share on other sites More sharing options...
Jobo Posted March 10, 2022 Report Share Posted March 10, 2022 I believe it is a board upgrade. I just took delivery of a V2 that now has Vector Diversity mode with latest firmware. V1 originally had ratio diversity but no vector. I’m sure Karl or Larry can confirm. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.