Boom Danny Posted August 1, 2019 Report Share Posted August 1, 2019 Testing out my Cooper 106 with a SD 788 I hope i do it right: Lectrosonics Recivers (SRC B1) going in the 6 Inputs of cooper 106 (switch to dyn) no pads output level is -35dB the LR mix i route to 7/8 line input of the SD788 route prefader to the mix track level 1kHz = -8 on the PPM meter is the little dot on the 788t meters the isos i level with the OSC output and level also the line level trim on the 788t to get the level on the little dot its -18dB FS The return i get from the Headphones in the return input of the Cooper i match the L/R when i switch to tape on the cooper with the headphone volume is this right ? Quote Link to comment Share on other sites More sharing options...
JonG Posted August 5, 2019 Report Share Posted August 5, 2019 I go line level out of my Lectros and into my mixer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.