Guillermo Ursini Posted August 12, 2019 Report Share Posted August 12, 2019 Hello sound community, i need to upgrade my olds Sennh G3 600mhz, then i was testing the MIRPO digital eng system rx:ACT-80 tx: ACT-80TC. I tried comparative tests with SENNH EW100G3, SONY UTX-B03 and DEITY CONNECT. I made videos to show, compare and talk. I personally prefer the MIPRO because: DIGITAL AUDIO 20hz-20khz 115db s/n, wideband, 50mw, true diversity removable antennas, but range not very good in my opinion. I connected one dipole antenna LECTROSONICS SNA600a which improve the signal. I'll be very happy if you can review it and share your opinion. Attach some photos and the youtube link with 9 videos (sorry for my english, is not the best jeje) Question are welcome... thanks. Guillermo Ursini Quote Link to comment Share on other sites More sharing options...
Mattias Larsen Posted August 13, 2019 Report Share Posted August 13, 2019 Thank you for showing this test. I have not found much about the Mipro system before. Many variables here to draw conclusions really, but it seems to perform roughly the same as G3, so not much of a real world upgrade in terms of reliability at least. Quote Link to comment Share on other sites More sharing options...
Guillermo Ursini Posted August 13, 2019 Author Report Share Posted August 13, 2019 Hello Mattias Larsen, thank you so much for your opinion, yes it is similar, but maybe with 2 external antennas can improve range, getting a best result than a G3. I'm curious about the normal range distance of a Lectro LT-LR at 50mw with the rx hide in the clothes (rx inside a pair of jeans for example). I'm having about 180ft with sight of view, and 100ft without sight of view (rx inside a pair of jeans for example). Quote Link to comment Share on other sites More sharing options...
karlw Posted August 13, 2019 Report Share Posted August 13, 2019 Here are a couple of tests done with the Lectrosonics L Series kit in New York a few years ago. Not sure of the exact distances, but you can get the idea: Towards the end of this one done by B&H, Rob is over 100 ft. away - again, outside in NY: Quote Link to comment Share on other sites More sharing options...
Guillermo Ursini Posted August 13, 2019 Author Report Share Posted August 13, 2019 Hello Karl, thanks for the links, good to know about these tests. I will try some comparatives in similar situations. Thanks for your time! Quote Link to comment Share on other sites More sharing options...
Mr Lawrence Posted December 4, 2021 Report Share Posted December 4, 2021 Is it possible to connect Sennheiser G3 transmiter with digital Mipro receiver? Quote Link to comment Share on other sites More sharing options...
Rick Reineke Posted December 5, 2021 Report Share Posted December 5, 2021 It depends if the Mipro can be tuned to the same frequency as the G3 Tx, if the Mipro allows disabling the pilot tone and companding circuitry if there are any. Quote Link to comment Share on other sites More sharing options...
Mattias Larsen Posted December 5, 2021 Report Share Posted December 5, 2021 Probably not, mipro is digital and the g3 is analoge Quote Link to comment Share on other sites More sharing options...
Kambor Posted February 17, 2023 Report Share Posted February 17, 2023 Anyone has seen this wireless system on the field in all this time? The brand name came up the other day in a course and it reminded me of this thread. Maybe as a digital alternative with twin connector diversity for the senny g4? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.