osa Posted November 12, 2019 Report Share Posted November 12, 2019 Curious to know if other Nova owners are using iso attenuation successfully. i dont recall this item being discussed as of late. I uncovered what might be a glitch with my unit v1.50 unless i am missing something. With attenuation set to off, everything appears to function as normal. when i engage -6dB or more to any or all iso tracks, i lose audio from any inputs assigned to tracks, but the output assigned to tracks stays in place but does not show attenuation at any level. i can still mix inputs to outputs. when i set back to off everything returns to the tracks record enabled, but the faders remain "up" and have to be turned down to reactivate fader control recorded test and brought into pro tools - image below shows how iso attenuation engaged mid recording seems to cause audio to disappear but only tracks with inputs assigned - digital or analog - and when turned off mid recording audio returns normal. leaving attenuation option off for now. i will call zaxom when i get a chance but wanted to see if there is anything crazy i am missing? -Ken Quote Link to comment Share on other sites More sharing options...
Mark Farag Posted November 12, 2019 Report Share Posted November 12, 2019 I believe this particular issue has been documented on the Facebook Zaxcom group. I believe Glen said it's a known issue and will be addressed via firmware soon. -Mark Quote Link to comment Share on other sites More sharing options...
osa Posted November 12, 2019 Author Report Share Posted November 12, 2019 Thank you. I wish we could port that Facebook group over here for those of us who don’t use Facebook Quote Link to comment Share on other sites More sharing options...
Jesse Flaitz Posted November 12, 2019 Report Share Posted November 12, 2019 42 minutes ago, osa said: Thank you. I wish we could port that Facebook group over here for those of us who don’t use Facebook Hah I agree, the Zaxcom FB group was the only thing I still wanted from the platform. Facebook as a whole isn't worth it for me either. Quote Link to comment Share on other sites More sharing options...
osa Posted November 13, 2019 Author Report Share Posted November 13, 2019 Ha ha while i am at it was there any mention on the face book about “error store (1)” when attempting to store presets? I feel like I’ve gone through pretty extensive testing so far and that’s the only other snag I ran into. It would say error in store (1) No matter which of the three store slots I attempted to save. But I did have success saving one to the mirror card. Quote Link to comment Share on other sites More sharing options...
Mark Farag Posted November 16, 2019 Report Share Posted November 16, 2019 FYI Ken and others. Posted by Howard Stark from the FB Group a few hours ago: "Here is Nova version 1.59 (BETA) www.zaxcomftp.com/fileshare/software/All-Zaxcom-Software.pdf www.zaxcomftp.com/fileshare/software/Nova_v1.59.zip 1.59 Nov 15 more fixes to frequency changes and auto pick no longer automatically send freq out zaxnet when RXer freq is changed 1.58 Nov 14 increased IFB module reliability no longer allow scanning on RX2 and RX4 1.57 Nov 12 attempted to fix Auto-Pan matrix confusion added auto-pan such that moving a fader changes pan cursor on ENG (Pan) home screen 1.55 Nov 8 moved RX POWER to RX SETUP page (slot1 and slot2 power) 1.54 Nov 8 Fixed jumping RF meters Fixed ISO ATTENUATION being off by a large amount No longer reset time and date when there is missing real time clock data" Quote Link to comment Share on other sites More sharing options...
osa Posted December 3, 2019 Author Report Share Posted December 3, 2019 After installing 1.66 and speaking with Howy about the particular issues i was having with iso attenuation, i believe we have determined it was partially fixed in 1.54 in that he designed it to be attenuation on single source iso tracks. for me and how i used attenuation on other zaxcom recorders, i was looking to attenuate outs assigned to tracks as well. also selected and unselected tracks to attenuate appeared to not be functioning correctly. he looked at my settings files this morn and mentioned revisiting nomad/maxx code. did not expect a file a few hours later. Howy is the real deal! here is v1.68 attached if anyone wants it. no facebook required for this fix either. amazing Nova_v1.68.zip Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.