nicoproson Posted November 26, 2019 Report Share Posted November 26, 2019 So I got a 3D printer and I have a few ideas regarding sound related prints. I'm using G3s for sending audio to cameras which I usually place in the side mounted pouches of my OR30. But those pouches are to big for G3s and I had a few fall over. So I came up with this. This is going to be field tested in the next few days. I already know that this is going to be a bit weak since this is a first draft PLA print but I was wondering what are your thoughts on this project and if you had any ideas to improve upon that idea. Just so you know this is not a commercial project and this will probably end up on Thingiverse. Quote Link to comment Share on other sites More sharing options...
Trey Posted August 5, 2020 Report Share Posted August 5, 2020 Great idea! Trey Quote Link to comment Share on other sites More sharing options...
Mikro Addict Posted August 31, 2020 Report Share Posted August 31, 2020 Nice idea. I have the same problem with my G1 and G2 Sennheisers, which I use for timecode and camera hops, besides IEMs. Could you print coupla more for me? Quote Link to comment Share on other sites More sharing options...
.png.279748a58a2b862b7aa5f3b84126e232.png)
.jpg.4eb7dd6bddc20cbf33e83fcb89907211.thumb.jpg.f54f5d91d835c483616aee3db04ac5b5.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.