codyman Posted December 20, 2019 Report Share Posted December 20, 2019 Has anyone ever wired up a DB25 cable to 2x XLR and power leads? I feel that it would be nice to have a bag wired up with a breakout cable + whips for a lightweight setup and then be able to pull the connector and slide it into an A10 rack / octopack / PSC Sixpack etc on a cart. Seems like it would be doable utilizing the right pinout? Quote Link to comment Share on other sites More sharing options...
Csaba Major Posted December 20, 2019 Report Share Posted December 20, 2019 You can buy it from Lectrosonics. Quote Link to comment Share on other sites More sharing options...
Stuart Posted December 20, 2019 Report Share Posted December 20, 2019 I have bags and a multichannel rack wired up this way. Small and light and easy to move receivers between kits. DB25s are easy enough to solder and come mega cheap. Pin out for basics of audio and power can be found in the SR manual. https://www.lectrosonics.com/phocadownload/srb5p_srb_man.pdf Quote Link to comment Share on other sites More sharing options...
Trey LaCroix Posted December 23, 2019 Report Share Posted December 23, 2019 That’s what I have in my bag. I made up 3 db25 connectors with audio and hirose for power. I pop them out and into a six pack when on a cart. Pics aren’t great but might give you an idea. Quote Link to comment Share on other sites More sharing options...
codyman Posted December 23, 2019 Author Report Share Posted December 23, 2019 Thanks everyone for the interesting setups. I am going to look into making my own cables as a little DIY project during this holiday downtime. Quote Link to comment Share on other sites More sharing options...
Favio Posted December 27, 2019 Report Share Posted December 27, 2019 @Trey LaCroix do you have any issues using your zaxcom receiver and SRC,s in the same bag? Quote Link to comment Share on other sites More sharing options...
Trey LaCroix Posted December 28, 2019 Report Share Posted December 28, 2019 9 hours ago, Favio said: @Trey LaCroix do you have any issues using your zaxcom receiver and SRC,s in the same bag? Not really. the only issue I’ve had is that the delay between zax xr and Lectro 400 is different. But if you add the right input delay on the lectros they line up well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.