Jump to content
Sign in to follow this  

SD833 experience

Recommended Posts

After a few months of work with the SD833, here are my impressions and some suggestions.

This topic is meant to be completed by other users to share their experience and thoughts about this machine, knowing that folks at Sound Devices are reading.

First of all, I have to say that the SD833 is a great tool. I loved the 633 and was kind of skeptical at the beginning, not seeing well what were the advantages of the upgrade.
But after a while, I have to say that I am completed conviced by the advantages of the 8 series, especially now with the new plugin and developments we can see coming.

At the beginning, I was worried by the power consumption, and if indeed the 833 is more power hungry, this is definitly not an issue at all.

With a full Audioroot Smart Battery of 98 Wh, I can work more or less five to six hours continuous, depending on channels activated, and with my MCR42’s feeded by the same battery. It’s  30 to 40 minutes less than the 633 in average, so not a big deal.
Speaking of power, I miss the Quickboot option of the 6 series. Working mainly in documentary where one have to react very quickly, sometimes I prefer to keep the recorder powered on to not miss any shot. I am shure that with Quickboot, I could lay the 833 in sleep mode and spare my batteries.

I love the flexibility of the routing and the 6 mic preamps. With the 633, when using an MS pair, the second channel potentiometer was not used and I had to mix the lavs on the small pots. Now, I put my Mid on channel 3, the Side on channel 4 and I keep channel 1 and 2 for radio microphones.
If I need more lavs, I use Dungan that works better than on the 633, or at least, the display is clearer. Speaking of the MS pair, I find very cool to have he gains linked too, but I would love to be able to trim the level of the second channel. Now the gains are perfectly matched, but sometimes, it’s usefull to be able to lower the second channel by a few dB’s.

The display, although small is clear and easily readable. But sometimes, when on a cart, I use the iPad app. I don’t know how could this be poossible , but I’d love to have the ability to browse the menus, or to adjust the eq’s on the iPad screen.
Regarding the eq’s, that’s a great addition compared to the 633, and one of the main reason to change for me. But I miss the ability to store setups. I mainly use the eq to compensate the lost of High’s when lavs are concealed, or with a wind fur, and also to emulate the LFA filter of the Nagra to compensate proximity effect. If I could store these default setups, that would be a great addition.
Same for the input routing. If I could easily change the inputs assignation and names without having to load a complete setup, that would be great and so helpful.

Regarding the meters, I miss the balistics settings that were in the 633. We can’t adapt the type of meters like before.
I love the PPM, and I can’t change the default setup of VU + Peak hold.

The ouput settings are awsome and very flexible, but I can’t send an X1 or X2 Bus to the XLR out. Recently, I had to make a different mix on the recorder and the scratch track on the camera and was surprised that I could not change the XLR out. We were shooting while skiing and I had not my TA3 adaptors…

Finally, this message is already far too long, and I am sorry for this, but I would say that I will not go back annd I am looking forward the developments of this great machine.

I'll be interested to read what other SD833 users are experiencing or suggesting.
Thanks for reading !

Share this post

Link to post
Share on other sites

Hi Henri,

I have a 833 and totally agree with you especially "I’d love to have the ability to browse the menus, or to adjust the eq’s on the iPad screen."  

I personally think we are right at the beginning of the developement of the 800 series actions and it will only get better.


Share this post

Link to post
Share on other sites
1 hour ago, henrimic said:

but I would love to be able to trim the level of the second channel.

This!  sort of a gain trim for linked inputs would be essential. I stopped working with linked gains because of this ...Maybe,  in linked-input-mode, the overridden gain pots could be used to trim the gain of the corresponding inputs in relation to the "master" gain? That would be really great. 

Now you can "only" link 2 inputs. When working with mic-arrays consisting of 3+ mics (DMS, D-Ortf...), it would be handy to link more than 2 inputs, also with gain trims.


Powerwise i dont know yet. It feels like the 833 sucks substantially more energy than 633. But this is just an nonscientific observation...and the only grain of salt. Will stay with the 633 for the remote jobs with lots of travel... And you can feed the 633 with AA, in case everything comes different as planned...


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...