Jump to content

Recommended Posts

I have a Weller WLC100 as well, however it not substitute for lack of skills.. Spend  a few extra $ for a variety of different size/shape tips, The WLC100's  included 'screwdriver'  tip is a bit large for the small TA solder pins and forget about soldiering a Hirose power plug without very small tip and perfect vision (or significant magnification)

XLRs are relatively easy with basic skills, a TA plug can be a challenge.. especially if resistors are needed.

Link to comment
Share on other sites

I really don’t like soldering, I have to admit. Never learned it, never really wanted to. For a lot of cables, like when I wanted to swap a connector on one end, I have recently discovered these solder connector with heat shrink. They are very easy to use and I can now put a Hirose connector on a 4pin XLR cable in minutes and it looks quite nice, too. 
 

https://www.amazon.com/-/Connector-Qibaok-Waterproof-Electrical-Automotive/dp/B083DXC9TP/ref=mp_s_a_1_3?dchild=1&keywords=solder+connector&qid=1591792578&sr=8-3

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...