Bouke Posted June 22, 2020 Report Share Posted June 22, 2020 Hi all, For those who need to deliver conform specs: I've been working my butt off to get things easier: My loudnessChange can now measure mono, stereo, 5.1 and 7.1 And it can correct if the loudness is wrong. But wait, there is more! It accepts inputs mono or poly, and you can output mono or poly (thus, interleave / de-interleave). For non-interleaved output, you can decide the new track names, and auto place them in a subfolder if desired. It can also remap if you go from L C R xxxx to L R C xxxx or alike, no matter the interleave in/ output. Then, if you have stems, it can auto correct the stems based on the printmaster. (that's not all, but I'll keep it short here.) I think the accuracy is on par with the competition (or better), for a fraction of the cost. But, to make it really great, the interface needs a bit of work. It's a mayhem of different formats to expect / output. I could use some others to have a look at that. If you feel to help, drop me a PM. Thanks, Bouke Quote Link to comment Share on other sites More sharing options...
Philip Perkins Posted June 22, 2020 Report Share Posted June 22, 2020 I'm in. Quote Link to comment Share on other sites More sharing options...
osa Posted June 23, 2020 Report Share Posted June 23, 2020 I am in as well Quote Link to comment Share on other sites More sharing options...
TVPostSound Posted June 24, 2020 Report Share Posted June 24, 2020 If I use software to correct loudness to my stems, what happens when I, later on, need to push in??? EDIT Punch in. Quote Link to comment Share on other sites More sharing options...
Philip Perkins Posted June 25, 2020 Report Share Posted June 25, 2020 Push in? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.