Jump to content

788T DE-15 Port Pin 10


jawharp

Recommended Posts

Hey,

 

I'm building a remote roll box for my 788t with some additional buttons on it, and was working on powering it.  I noticed that pin #10 on the DE-15 says 10V DC in the manual.

 

Is that an input or an output?  It'd be cool to power the external box off one connector, but it seems suspiciously like it's an input.

Link to comment
Share on other sites

pin 10 i think would be a loop through of the DC input, so can be used if you want to power a receiver with it. the input voltage range is 10-18v.
it has nothing to do with AES42, as the powering is provided the same way you would power a P48 mic - with the XLR.
when i made myself an input cable for my super CMIT, it didn't use pin 10.

Link to comment
Share on other sites

9 hours ago, rich said:

it has nothing to do with AES42, as the powering is provided the same way you would power a P48 mic - with the XLR.
when i made myself an input cable for my super CMIT, it didn't use pin 10.


yes, I think you‘re right. Don’t know what I was thinking. Or why

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...