SoundKurt Posted August 1, 2020 Report Share Posted August 1, 2020 Does anyone know why I can only set the same frequencies between my Wisycom MCR54 and MTP40s using the sync function? If i try to set them manually, it never works. The the same group number and channel number is always a different frequency on the TX and RX. Quote Link to comment Share on other sites More sharing options...
Ken Goodwin Posted August 2, 2020 Report Share Posted August 2, 2020 Connect the MCR54 to your computer and use it to connect to the Wisycom TX Manager software. The Tuning Groups are user programmable and the Group/Ch List is probably not mapped to what your MTP40s have saved. Quote Link to comment Share on other sites More sharing options...
jason porter Posted August 2, 2020 Report Share Posted August 2, 2020 Wisycom sent me a file to reload the mapped freqs on my MCR42 receivers after I accidentally erased them. Maybe they can do the same for you (to match your Tx) Quote Link to comment Share on other sites More sharing options...
alexbooy Posted August 2, 2020 Report Share Posted August 2, 2020 Try todo it in a group higher than 30. These are unlocked groups. Alex Quote Link to comment Share on other sites More sharing options...
jason porter Posted January 1, 2023 Report Share Posted January 1, 2023 8 hours ago, filmsalang said: Maybe in this video? https://youtu.be/a6qJD-07n6w Hello, I'd like to sync my MTP41s to MCR54's GR/CH. How can I connect MTPs through MCR54? at least I can update MTP firmware through MCR54 IR bridge, but don't know how to import through TX manager software.(currently running TX Manager 1.1.15) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.