Jump to content

Schoeps CUT60 and CMR


Mikro Addict

Recommended Posts

You can physically connect the two. But it probably won’t work. 
Not exactly sure what we’re looking at in your picture, but normally the way you connect things follows the same pattern. The capsules have an inside thread at the bottom, the preamps have an outside thread at the top. All in-between pieces follow this pattern. Like the GVC which has an outside thread at the top, to accept capsules, and an inside thread at the bottom to be screwed onto a preamp. The CMR also has an outside thread so that it can mate to a capsule. The Cut60 follows this pattern, too, otherwise it wouldn’t be usable. Not sure what the GVC would change about this situation. 
But I heard that the CMR won’t work with additional active components. 

Link to comment
Share on other sites

44 minutes ago, Constantin said:

You can physically connect the two. But it probably won’t work. 
Not exactly sure what we’re looking at in your picture, but normally the way you connect things follows the same pattern. The capsules have an inside thread at the bottom, the preamps have an outside thread at the top. All in-between pieces follow this pattern. Like the GVC which has an outside thread at the top, to accept capsules, and an inside thread at the bottom to be screwed onto a preamp. The CMR also has an outside thread so that it can mate to a capsule. The Cut60 follows this pattern, too, otherwise it wouldn’t be usable. Not sure what the GVC would change about this situation. 
But I heard that the CMR won’t work with additional active components. 

I can confirm that it does not. Roll off at the mixer for CMR use.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...