Jump to content

Lectro HM-series plugon tx XLR connector issue


Recommended Posts

Lately I've been seeing this issue more frequently with the HM plugons: wear on the female XLR connector causing a bad contact problem when joining with the male XLR side. I'm sure it's a problem with the Neutrik connector and not a Lectro design flaw, and that careless operation/use of the HM makes the problem much more likely to happen (putting undue stress on the connector in the field). It just seems rather unfortunate that the repair route needs to be to replace the entire XLR assembly (a costly job), rather than replacing a simple connector.

Wondering if anyone else has experienced this issue, and whether anyone had success with another method of repair? 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...