Conor Posted November 30, 2020 Report Share Posted November 30, 2020 Lately I've been seeing this issue more frequently with the HM plugons: wear on the female XLR connector causing a bad contact problem when joining with the male XLR side. I'm sure it's a problem with the Neutrik connector and not a Lectro design flaw, and that careless operation/use of the HM makes the problem much more likely to happen (putting undue stress on the connector in the field). It just seems rather unfortunate that the repair route needs to be to replace the entire XLR assembly (a costly job), rather than replacing a simple connector. Wondering if anyone else has experienced this issue, and whether anyone had success with another method of repair? Quote Link to comment Share on other sites More sharing options...
Naga Posted December 3, 2020 Report Share Posted December 3, 2020 A thin rubber band would help you for the time being. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.