TomBoisseau Posted January 2, 2021 Report Share Posted January 2, 2021 I’m considering getting a Hirose adapter for my MixPre-3 II. I’m currently trying to decide between the Sound Devices MX-HIROSE and the Cable Techniques MX-POWERSLED. The The Cable Techniques looks to be more robust, however the Sound Devices unit appears to be smaller / lower profile (which I like). They both are about $100. Any words of wisdom? Thanks, Tom Quote Link to comment Share on other sites More sharing options...
Erin Bliss Posted January 2, 2021 Report Share Posted January 2, 2021 I did this same comparison for my MixPre and ended up going with the CT unit. It is physically larger but not so much that it makes too much difference in my bag. The main ultimate selling point was that the CT unit is all metal. You probably won't go too far wrong either way. Quote Link to comment Share on other sites More sharing options...
TomBoisseau Posted January 2, 2021 Author Report Share Posted January 2, 2021 Thanks for your input Neil. How well "recessed" is the Hirose connector on the Cable Techniques unit? It appears (from photos) that the "sideway" recess is greater with the Sound Devices adapter, which might possibly mean less strain on the connection when using in a bag and when running about. Tom Quote Link to comment Share on other sites More sharing options...
Rick Reineke Posted January 2, 2021 Report Share Posted January 2, 2021 It 'appears', by the photos, the SD adapter is a lower profile module. Quote Link to comment Share on other sites More sharing options...
Erin Bliss Posted January 2, 2021 Report Share Posted January 2, 2021 Here's a detail shot of the inset on the hirose connector on the mx-powersled mounted to a mixpre-3 II. Grid lines are every half-inch. Quote Link to comment Share on other sites More sharing options...
TomBoisseau Posted January 3, 2021 Author Report Share Posted January 3, 2021 Thank you Neil. That's very helpful. Tom Quote Link to comment Share on other sites More sharing options...
haifai Posted January 3, 2021 Report Share Posted January 3, 2021 Also there are adapters with internal battery for the case your external battery dies or you want to swap it without loosing power like this one from kortwich https://www.shop-ftt.de/de/speiseadapter-sound-devices-mixpre-3-6 Quote Link to comment Share on other sites More sharing options...
r.paterson Posted January 3, 2021 Report Share Posted January 3, 2021 A thing about the hirose adaptors to remember is that when you connect an ext dc battery to the hirose connector they are akways powered on as the dc regulator in the adaptor. Is always on so will slowly drain your ext battery overnight etc so always disconnect ext batt when not being used. Quote Link to comment Share on other sites More sharing options...
James Louis Posted May 14, 2022 Report Share Posted May 14, 2022 My issue with stacking on the backup power source is that it’s a false sense of security. First, I’m not sure if you could configure the AA’s as the backup to the hirose if they are using the same connection. Okay, I get it, it’ll keep rolling the real issue however is that the sled itself falling out entirely is your most likely point of failure Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.