tvaudioman Posted March 11, 2021 Report Share Posted March 11, 2021 Is there a portable transmitter, that would work in a location sound bag, for Sennheiser IEM? Doesn't have to be stereo, though that wouldn't be bad. I'm guessing the Senn IEM's do not work with G3 transmitters, but have not had the gear to try. Thanks Quote Link to comment Share on other sites More sharing options...
Michael Manzke Posted March 11, 2021 Report Share Posted March 11, 2021 The Sennheiser IEM EK G2/G3/G4 do work with a SK G2/G3/G4 transmitter as long as the frequencies match. (I've never used a G1 EK/SK, but I'll assume, that they'd also work) Quote Link to comment Share on other sites More sharing options...
Derek H Posted March 11, 2021 Report Share Posted March 11, 2021 You have to turn pilot tone off on the receiver and mono only but they work great together. if you need a high power transmitter try SK2000. Up to 100mW in USA Quote Link to comment Share on other sites More sharing options...
Tales Manfrinato Posted March 11, 2021 Report Share Posted March 11, 2021 As far as I know all Evolution Series are cross-compatible. For a portable Tx probably the SK2000 is what you're looking for if you need I higher transmission power. Quote Link to comment Share on other sites More sharing options...
IronFilm Posted March 12, 2021 Report Share Posted March 12, 2021 An SMQV in Mode 3 can also give you that higher transmission power, in a very portable form factor for the bag. Quote Link to comment Share on other sites More sharing options...
osa Posted March 12, 2021 Report Share Posted March 12, 2021 I use an smqv in mode 6 for exactly this purpose and i have found this to be the most robust and range reliable setup for sennheiser iems with a compact transmitter Quote Link to comment Share on other sites More sharing options...
IronFilm Posted March 12, 2021 Report Share Posted March 12, 2021 6 hours ago, osa said: I use an smqv in mode 6 for exactly this purpose and i have found this to be the most robust and range reliable setup for sennheiser iems with a compact transmitter Mode 6? Curious, I have always used Mode 3. But perhaps I should give Mode 6 a spin: On 4/25/2014 at 2:30 AM, karlw said: We have had some users report that Mode 6 (developed to match Shure's older UHF series) works better for G3 (HDX companding) than Mode 3 does. It's worth giving it a try. Quote Link to comment Share on other sites More sharing options...
Mungo Posted March 12, 2021 Report Share Posted March 12, 2021 19 hours ago, Tales Manfrinato said: As far as I know all Evolution Series are cross-compatible. For a portable Tx probably the SK2000 is what you're looking for if you need I higher transmission power. Yes, it works in mono. Unfortunately the preset lists don't match most of the time. SK500/2000 can do 50mW, SK100/300 only 30mW (in Europe). So cheapest combo is SK100 with EK1039 receivers. Pilot tone can be left on and operates as a better squelch. Quote Link to comment Share on other sites More sharing options...
osa Posted March 12, 2021 Report Share Posted March 12, 2021 2 hours ago, Mungo said: Yes, it works in mono. Unfortunately the preset lists don't match most of the time. SK500/2000 can do 50mW, SK100/300 only 30mW (in Europe). So cheapest combo is SK100 with EK1039 receivers. Pilot tone can be left on and operates as a better squelch. This is the only hangup on using lectro transmitters vs paired sennheisers- the loss of pilot tone and no squelch. there is a risk of listeners getting blasted with stray rf if a battery fails Quote Link to comment Share on other sites More sharing options...
Derek H Posted March 12, 2021 Report Share Posted March 12, 2021 No squelch always works and is customizable on each receiver. preset lists don’t match? Maybe. I’ve never used them. I usually tune in the advanced menu. Quote Link to comment Share on other sites More sharing options...
Constantin Posted March 12, 2021 Report Share Posted March 12, 2021 3 hours ago, osa said: This is the only hangup on using lectro transmitters vs paired sennheisers- the loss of pilot tone and no squelch. there is a risk of listeners getting blasted with stray rf if a battery fails Pilot tone can only stay on with the 1039‘s as they are mono, too. If you use the IEM receivers (which are more user-friendly), you need to disable pilot tone. So no disadvantage when using Lectro transmitters Quote Link to comment Share on other sites More sharing options...
nevo Posted March 12, 2021 Report Share Posted March 12, 2021 I use 2x sk2000 with ek300 and ek2000...I also use the g3 base station and a Lectro T4 .... very versatile ,sounds good and great range with the T4 Quote Link to comment Share on other sites More sharing options...
osa Posted March 13, 2021 Report Share Posted March 13, 2021 6 hours ago, Constantin said: Pilot tone can only stay on with the 1039‘s as they are mono, too. If you use the IEM receivers (which are more user-friendly), you need to disable pilot tone. So no disadvantage when using Lectro transmitters Thank you this i did not know! I always thought I was lacking that by not being all sennheiser Quote Link to comment Share on other sites More sharing options...
Derek H Posted March 13, 2021 Report Share Posted March 13, 2021 Just to be clear you need to put the Lectro transmitter in IFB compatibility mode. A Sennheiser receiver will not work well with the default digital hybrid mode. Doing the cross brand thing in reverse where you try to receive a Sennheiser transmitter (HDX compandor) with a Lectro receiver does not work very well in my opinion. Unless you have an SRc or maybe LR which has a special EVO compatibility mode. If you have the older high-end Sennheiser models in the 3000 or 5000 range there are specific emulations for that compandor (hi-dyn) in all Lectro 400 receivers. Quote Link to comment Share on other sites More sharing options...
axel Posted March 13, 2021 Report Share Posted March 13, 2021 G2/G3/G4 will work fine with IEM, robust setup, great reach, batteries last for 12+ hs. You can add EK1039 as additional Rx, wich are user freindly and a little cheaper, built like tanks, sound is OK for IEM and no compromise in reach. Quote Link to comment Share on other sites More sharing options...
osa Posted March 14, 2021 Report Share Posted March 14, 2021 20 hours ago, Derek H said: Just to be clear you need to put the Lectro transmitter in IFB compatibility mode. A Sennheiser receiver will not work well with the default digital hybrid mode. Doing the cross brand thing in reverse where you try to receive a Sennheiser transmitter (HDX compandor) with a Lectro receiver does not work very well in my opinion. Unless you have an SRc or maybe LR which has a special EVO compatibility mode. If you have the older high-end Sennheiser models in the 3000 or 5000 range there are specific emulations for that compandor (hi-dyn) in all Lectro 400 receivers. Mode 3 or 6 on lectro transmitters to taste as i believe ifb mode does not work transmitting to sennheiser receivers. off topic from the original post but i do use in the reverse sennheiser plugon transmitters with stick mics and get satisfactory results with 411 receivers in the same modes above. Not feature film quality for sure but beats some lower grade alternatives with live and eng stuff Quote Link to comment Share on other sites More sharing options...
Paul Katzman Posted March 15, 2021 Report Share Posted March 15, 2021 On 3/14/2021 at 9:10 AM, osa said: Mode 3 or 6 on lectro transmitters to taste as i believe ifb mode does not work transmitting to sennheiser receivers. off topic from the original post but i do use in the reverse sennheiser plugon transmitters with stick mics and get satisfactory results with 411 receivers in the same modes above. Not feature film quality for sure but beats some lower grade alternatives with live and eng stuff IFB mode works but just doesn’t sound awesome. Mode3 is ok but I tend to notice commanding artifacts more, Mode6 has less of this and more LF response to my ear, but a higher noise floor. I really wish we’d get a Mode E on T4s like the SRc but that’s probably a long shot. Quote Link to comment Share on other sites More sharing options...
vale Posted November 11, 2021 Report Share Posted November 11, 2021 Kind of opposite question: I use a stereo G4 IEM transmitters with IEM receivers. Left channel for video village, right channels for internal use. I was thinking to add some EK receivers (not iem) for cameras or monitor recording. In that case, will I have both channels summed to mono in the receiver (so, useless for what I need) or e.g just left channel? I'm afraid it's the first one, but just checking. Thanks Valentino. Quote Link to comment Share on other sites More sharing options...
srsound Posted November 12, 2021 Report Share Posted November 12, 2021 Just saw this topic and decided to try my Wisycom MTP40S Transmitters with my Senn G3 IEM300's. I just tuned them to the same frequency and boom! Work and sound fine! Maybe this is common knowledge but its new to me. Regards, Steve. Quote Link to comment Share on other sites More sharing options...
resoNate3973 Posted November 1, 2023 Report Share Posted November 1, 2023 Great to know y’all thanks - trying to mix my G3s with Lectro R1As Quote Link to comment Share on other sites More sharing options...
IronFilm Posted November 2, 2023 Report Share Posted November 2, 2023 6 hours ago, resoNate3973 said: Great to know y’all thanks - trying to mix my G3s with Lectro R1As Lectro R1A receivers don't have different mode options (such as Mode 6), they're only ever in IFB Mode. I'd suggest just getting yourself a secondhand UM400/LMa/T4/T1 transmitter on the cheap. You will get better range too than with a G3 transmitter. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.