Sprotnik Posted March 12, 2021 Report Share Posted March 12, 2021 Hi you all. I have a couple countryman B6 terminated in a TA5f connector for lectrosonic transmitters and I want to change them to Wisycom transmitter with a LEMO3 connector. The countryman is with the TA5f right now, and when you open the connector there´s two little resistors connecting some pin. I don´t know (and I didn´t find anything in google) if I have to keep those resistors if I change the connector to a LEMO3 for connecting them to a MTP40, or just soldering the cables following the pin code and removing the resistors. any help will be helpful thanks! Quote Link to comment Share on other sites More sharing options...
rich Posted March 12, 2021 Report Share Posted March 12, 2021 the resistors are specific to the Lectro wiring. here is a link to the countryman wiring tablehttps://countryman.com/microphone-wiring/#tableand if you search the internet for lectrosonics mic wiring, youll be able to find the lectrosonics sheet with all the various wiring options for their transmitters. Quote Link to comment Share on other sites More sharing options...
Sprotnik Posted March 12, 2021 Author Report Share Posted March 12, 2021 51 minutes ago, rich said: the resistors are specific to the Lectro wiring. here is a link to the countryman wiring tablehttps://countryman.com/microphone-wiring/#table great! I didn't find this table. thanks a lot, Rich. very helpful. best regards Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.