jwill Posted March 31, 2021 Report Share Posted March 31, 2021 While recording can I send audio via my mixer to/thru my I Phone XR so someone can listen remotely? Quote Link to comment Share on other sites More sharing options...
Philip Perkins Posted March 31, 2021 Report Share Posted March 31, 2021 Yes, you can assign the X3/4 outs on the output routing page. What you can't do (and too bad sez me) is have playback through X3/4 on the 633. Quote Link to comment Share on other sites More sharing options...
Allen Rowand Posted March 31, 2021 Report Share Posted March 31, 2021 Started doing something similar for a podcast I'm recording, where my co-host is calling in while I'm onsite with the guest. Picked up a used JK Audio Daptor 2 and set up a mix minus on a main out of my F8n, while the sub out feeds a headphone distro. Since I've never had a chance to use a 633: are the mixes fully independent? On the F8n I can route the L/R mix or a selection of channels pre or post fader, but the fader level is the same on every output. Didn't know if the 6 or 8 series has multiple mix busses with independent level per bus. Just curious. Quote Link to comment Share on other sites More sharing options...
Derek H Posted April 1, 2021 Report Share Posted April 1, 2021 It’s pretty flexible. You can choose what source from the individual inputs or select the mix bus as the source and you can attenuate the output independently of the source or mix level. Quote Link to comment Share on other sites More sharing options...
.png.279748a58a2b862b7aa5f3b84126e232.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.