Jump to content

Schoeps CMC 1 U vs L


Recommended Posts

Hi there. I am considering upgrading my indoor boom mike (CMC641) to the smaller CMC1 and cannot decide whether to go with the Lemo (CCM) type or the XLR one. Has anyone compared those two against each other? Especially combined with the fitting Cinela suspensions (Osix CMC1 Soft / Minix CCM respectively)?

The Lemo version seems to be a little smaller and lighter, but there is no angled version of the Lemo connector, so the difference would not exactly be huge. How much of a difference does the two-ring Cinela suspension make vs the one-ring version for the CCM?

I do not plan to use the Cut-60 filter either way.

Link to comment
Share on other sites

I'm going to buy the CMC 1 also for the same reason. I'm not a fan of specialty cable setups like that on the Osix. The connector adds bulk and weight which defeats the whole purpose of the CMC 1. If I went with a Cinela, I'd cut off the XLR connector and cable, which means I'm not going to buy the Cinela.  I haven't decided what suspension I'm going to use. I plan to connect my boom cable directly to the CMC-1 (rt. angle XLR).

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...