Jump to content

Schoeps MS with 833/ low cut Ch2


Michael Thaele

Recommended Posts

Hello everyone.
I recently bought the 833 and tried out my stereo sets (Schoeps CMC641 or miniCMIT / CCM8).
I set CH1 and CH2 to "linked" and was a bit surprised that you can only define a common LowCut for both channels. Maybe I'm wrong, but the 633 was different.

In any case, the CCM8 needs a higher LowCut for boom work than a miniCMIT or a CMC641 (with a CUT60). Schoeps no longer offers its LC 120 U.
Does anyone have any suggestion for an XLR module? Is someone using this adapter: Shure A15HP?
In this context I would be interested in how the linked mode works on a Nova. Can you define different LowCuts for channels 1 and 2?
I sent Sound Devices an e-mail about this and asked that they open up the LowCut or EQ settings for CH2 in linked mode in a firmware update.

Link to comment
Share on other sites

You can also link the channels by fader and gain or just fader if you want.
And they don’t have to be adjacent.

For example, you could use channel 3 for Mid and 7 for Side and just link the faders.

 In this case, all the other parameters remain independent.  
You’ll find this option in Setup Channels / Group.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...