Donald Kauffman Posted October 9, 2021 Report Share Posted October 9, 2021 Hi folks I'm attempting to use Dante for the first time and not having any joy. Have the DSQD and 888 connected and the lights on the Dante ports are all flashing. But when I try to route Dante to the input channels on the 888 I'm getting nothing. I'm sure I'm doing something stupid. Anyone have experience connecting these two? Cheers Quote Link to comment Share on other sites More sharing options...
Shastapete Posted October 9, 2021 Report Share Posted October 9, 2021 Did you connect them in Dante Controller? Quote Link to comment Share on other sites More sharing options...
Donald Kauffman Posted October 9, 2021 Author Report Share Posted October 9, 2021 I did not! I thought it was a plug and play operation unless routing to a computer. Better look into it more. Thanks for the response Quote Link to comment Share on other sites More sharing options...
Johnny Karlsson Posted October 9, 2021 Report Share Posted October 9, 2021 I would recommend doing Level 1 and 2 on the Audinate website. It’s free and will help understand all the routing etc. https://www.audinate.com/learning/training-certification/dante-certification-program?link=hm-r4-r-mc1 Quote Link to comment Share on other sites More sharing options...
Donald Kauffman Posted October 9, 2021 Author Report Share Posted October 9, 2021 Oh nice. I will do that today. Thanks a lot Quote Link to comment Share on other sites More sharing options...
Matt Radlauer Posted October 10, 2021 Report Share Posted October 10, 2021 13 hours ago, Donald Kauffman said: I did not! I thought it was a plug and play operation unless routing to a computer. Better look into it more. Thanks for the response The short of it is that you need to only make the routing selection with the computer once. After that you're all set. I still keep my laptop handy just in case though. Each new device needs to be routed in Dante Controller....Once. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.