Mark Posted October 16, 2021 Report Share Posted October 16, 2021 Hi all. anyone using DPA 6060 or 6061 into Lectrosonics smqv or ssm? thoughts? Around where are you setting tx gain? cheers Quote Link to comment Share on other sites More sharing options...
Derek H Posted October 16, 2021 Report Share Posted October 16, 2021 Try 25-30 on a 6061. 15-20 for a 6060. Quote Link to comment Share on other sites More sharing options...
Mark Posted October 16, 2021 Author Report Share Posted October 16, 2021 Thanks Derek. obviously it is different fo different voices. trying to get some feedback before a purchase as there may not be the opportunity to test before then. As a happy DPA user for many years, (4060/4061), just trying to get some real world feedback. Quote Link to comment Share on other sites More sharing options...
LarryF Posted October 16, 2021 Report Share Posted October 16, 2021 (edited) IMHO, I think the 4060 is the better choice. On loud signals, you can use "0" with no transmitter preamp problems. Make sure whoever builds the connector, uses the Lectrosonics recommended 1k resistor. Ignore the DPA recommendation of no resistor on the 4061. Set the gain according to the transmitter manual. Best Regards, Larry Fisher Edited October 16, 2021 by LarryF Comment about gain Quote Link to comment Share on other sites More sharing options...
Johnny Karlsson Posted October 16, 2021 Report Share Posted October 16, 2021 49 minutes ago, Mark said: As a happy DPA user for many years, (4060/4061), just trying to get some real world feedback. I would say, the 60xx are essentially the same in terms of sound and settings, so if you are used to the 40xx, you'll probably won't need to make any changes. The main difference is they are smaller in size. I use both 4061and 6061, and to me they are interchangeable. Quote Link to comment Share on other sites More sharing options...
Mark Posted October 16, 2021 Author Report Share Posted October 16, 2021 Thanks Larry and Johnny. Microdot to Ta5f would be a DPA adapter. all input most appreciated. cheers Quote Link to comment Share on other sites More sharing options...
Mark Posted October 17, 2021 Author Report Share Posted October 17, 2021 Just reread your reply properly Larry. 1k resistor it is! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.