Paul Garafola Posted December 11, 2021 Report Posted December 11, 2021 Have you ever used the MMP-A preamp with the 4018 cap? 1. Do you have any samples to share, compared with the B or C? 2. If not, what was or is your opinion/impression of the A. The reason I'm asking and what has peaked my curiosity is that there are no dialogue audio samples online anywhere, yet I'm reading about how the MMP-A is "superior" to the others. Hhmmm....while that may be just an opinion of some reviewers, it still intrigues me. Hopefully, I'll be able to get one in my hands soon to try it myself. But in the meantime, any feedback about your direct experience with the MMP-A would be so greatly appreciated. Thanks everyone!
Dejan Ceko Posted December 11, 2021 Report Posted December 11, 2021 Hi Paul, I will record some samples for your consideration and post it here during next week. MMP/A is not RF shielded (so I do not use it with A10TX of mine - cable only), just to know. Regards, Dejan.
Paul Garafola Posted December 11, 2021 Author Report Posted December 11, 2021 20 minutes ago, Dejan Ceko said: Hi Paul, I will record some samples for your consideration and post it here during next week. MMP/A is not RF shielded (so I do not use it with A10TX of mine - cable only), just to know. Regards, Dejan. THANK YOU, Dejan, for your quick reply. Ooooh, that's good to know. In my case here, I'm cable only. So that would be a non-issue for me. Looking forward to hearing your samples, preferably with some low cut on the mixer if you can. Maybe 100Hz?
Paul Garafola Posted December 11, 2021 Author Report Posted December 11, 2021 Just now, Dejan Ceko said: LC@100Hz will be. THANK YOU!!! 👍🏽
Dejan Ceko Posted December 21, 2021 Report Posted December 21, 2021 Hey Paul, Sorry for the delay ... I was hoping to get 4018 capsule no4 to put MMP/G in consideration also , but it was not possible at the moment. SD633 / gain at 1o'clock / LC@100Hz 48kHz/24bit polyWAV Track no1 is MMP/A , T2 is MMP/B , T3 is MMP/C Cheers. ABC-test.WAV ABC-test.zip
Paul Garafola Posted December 21, 2021 Author Report Posted December 21, 2021 Thank you, Dejan. I appreciate you taking the time to do that. 🍻
Dejan Ceko Posted December 21, 2021 Report Posted December 21, 2021 It IS all about sharing the knowledge... 🤓 Cheers.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now