Axel Mishael Posted February 10, 2022 Report Share Posted February 10, 2022 Hello, I'm testing my equipment as I'm about to start a new film and I have found out that one of my SSM is not working, and although I've checked and rechecked everything and ran through the manual, there's simply no rf receiving either on a 411 or on my venue. One thing I noticed it, was also that there's no dot on the frequency display as you can see on the pictures, has anyone have had this same issue? thank you, Axel. IMG_1072.MOV 1649645870_06CFB647-1589-4E8E-B22F-D190F192C82F2.MP4 IMG_1070 2.HEIC Quote Link to comment Share on other sites More sharing options...
edward chick Posted February 10, 2022 Report Share Posted February 10, 2022 Have you checked the compatibility modes of both the transmitter and receiver? Quote Link to comment Share on other sites More sharing options...
Axel Mishael Posted February 10, 2022 Author Report Share Posted February 10, 2022 Yes Ed, firmware updated, compat checked, all of the basics... Quote Link to comment Share on other sites More sharing options...
karlw Posted February 10, 2022 Report Share Posted February 10, 2022 Looks like the PLL has come unlocked. We should take a look at that unit in our service dept. Quote Link to comment Share on other sites More sharing options...
Axel Mishael Posted February 10, 2022 Author Report Share Posted February 10, 2022 2 minutes ago, karlw said: Looks like the PLL has come unlocked. We should take a look at that unit in our service dept. Thank you Karl, I'll write and send then... Quote Link to comment Share on other sites More sharing options...
.png.279748a58a2b862b7aa5f3b84126e232.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.