Actual visual sound Posted March 23, 2022 Report Share Posted March 23, 2022 I'm new to the Lectrosonic wireless, I'm currently working working with the Lectrosonic L series and after using the device for few hours I discovered the LR stopped sending audio to the mixer. The P sign indicated it's muted. Please I really need your help on this. Quote Link to comment Share on other sites More sharing options...
VASI Posted March 23, 2022 Report Share Posted March 23, 2022 From the manual: RX ==== 1. Try a different lavalier. 2. Sq. Bypass. Quote Link to comment Share on other sites More sharing options...
karlw Posted March 23, 2022 Report Share Posted March 23, 2022 There are a few operational reasons why the receiver doesn't recognize pilot tone: 1. The compat mode has changed. Make sure the same compat mode is selected in the transmitter and receiver. The default for standard US product would be "NU Hybrid". 2. If your system is in the A1 frequency band, there may be a mismatch of pilot tone frequencies if you are operating on a frequency between 486.400 and 495.600 MHz. This frequency range is common to both Block 470 and Block 19, so both the transmitter and receiver have to be on the same frequency AND the same block. 3. If your transmitter audio gain is set far too low, the receiver can squelch (mute audio) even at normal distances. Your audio gain should be set on the transmitter so that peaks in the audio trigger the -20 modulation LED to blink red briefly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.