paaskyp Posted July 8, 2022 Report Share Posted July 8, 2022 I tried to find a conversation on the subject, but couldn’t. I’ve heard that after a mic goes into a quality preamp/limiter and is properly gain staged, the transmitter shouldn’t matter much - provided that it isn’t 2.4GHz or BT or in that vein. But I have my doubts. What are the transmitters people like to use in conjunction with the MM-1? a plugon? the best tx you have? or the cheapest one? Quote Link to comment Share on other sites More sharing options...
r.paterson Posted July 8, 2022 Report Share Posted July 8, 2022 I use zax trx900Aa Quote Link to comment Share on other sites More sharing options...
Trey LaCroix Posted July 8, 2022 Report Share Posted July 8, 2022 We used to use an MM-1 going into a UM400A (then later an SMV) and it sounded great. Gain staging wasn’t the most precise if I recall correctly but we found a sweet spot that worked really well. We set ours up so that the limiter on the MM-1 would kick in a little bit before the limiter in the transmitter and the levels on both were close enough. I don’t remember the exact numbers but we were typically within like 3 clicks and always made an adjustment there, never at the lectro. We used a line level cable to go XLR out to Ta5 and also had a g3 with my slate mic going into the monitor in for comms. it was bulky but man did it sound good! Quote Link to comment Share on other sites More sharing options...
JonG Posted July 8, 2022 Report Share Posted July 8, 2022 SMQV, HMa Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.