Phil Posted May 23, 2023 Report Share Posted May 23, 2023 SOLVED: Fellow sound people, Has anyone successfully used a DPA MMP-C preamp with an SKP 500 plug-on transmitter? I have a G2 version on loan and am only getting serious noise, but no actual signal through. I’m guessing it has something to do with the power supply. The B-preamp works fine on the plug-on and the C works fine on other ph48 sources. It really seems to be the combination of MMP-C and SKP 500, which isn’t working. I’m curious, if a G4 might work better than the G2 I tested with. Any input is appreciated! Thx! Quote Link to comment Share on other sites More sharing options...
rich Posted May 23, 2023 Report Share Posted May 23, 2023 whilst i cant properly answer your question as i dont have any sennheiser plug on transmitters. but i do have the MMP-B and MMP-C pre amps, and have no issue using either with my A10 tx. or straight into my recorder. do you have a volt meter so you can verify that you can see 48v on pins 2 and 3? Quote Link to comment Share on other sites More sharing options...
Phil Posted May 23, 2023 Author Report Share Posted May 23, 2023 Checking the voltage makes sense, I'll try that. 👍🏻 Just have to borrow a volt meter. A friend of mine also confirmed, that his C and B preamps work fine with his ZMT4s. Quote Link to comment Share on other sites More sharing options...
Phil Posted May 26, 2023 Author Report Share Posted May 26, 2023 By buying and trying a G4 plug-on I found out, that it does support the MMP-C preamp, opposed to the G2 version. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.