sergiofucchi Posted April 24, 2013 Report Share Posted April 24, 2013 I own two Powerex MH C9000. Using the analysis function with the batteries Powerex 2700 mAh I have found that in fact they have a real capacity variable from a minimum of 2300 mAh to a maximum of 2550 mAh. Sergio. Quote Link to comment Share on other sites More sharing options...
LarryF Posted April 24, 2013 Report Share Posted April 24, 2013 I own two Powerex MH C9000. Using the analysis function with the batteries Powerex 2700 mAh I have found that in fact they have a real capacity variable from a minimum of 2300 mAh to a maximum of 2550 mAh. Sergio. That sounds about right. I have found various battery brands test 10% less than their rated capacity. Definitely some hype going on. Best, Larry F Lectro Quote Link to comment Share on other sites More sharing options...
studiomprd Posted April 24, 2013 Report Share Posted April 24, 2013 " a real capacity variable from a minimum of 2300 mAh to a maximum of 2550 mAh. " +/- 8% Quote Link to comment Share on other sites More sharing options...
andrewstone Posted April 24, 2013 Report Share Posted April 24, 2013 A relatively new forum member here... Fantastic resource and good crew. Learning things here every day. This thread is particularly enlightening so I wanted to give a shout out for this and the other knowledge you as forum members dispense. Thank you! -Andrew Quote Link to comment Share on other sites More sharing options...
Max Hirtenstein Posted April 25, 2013 Report Share Posted April 25, 2013 I'm getting almost 5 hours in an SMa at 100mw with a single powerex 2700. My SMQv logically gets about twice that. I don't know if it's placebo or black magic, but the silver paste seems to increase battery life. Quote Link to comment Share on other sites More sharing options...
LarryF Posted April 25, 2013 Report Share Posted April 25, 2013 I'm getting almost 5 hours in an SMa at 100mw with a single powerex 2700. My SMQv logically gets about twice that. I don't know if it's placebo or black magic, but the silver paste seems to increase battery life. Lectro only deals in white magic using organic incense made in fair trade countries. "Oz" Fisher Quote Link to comment Share on other sites More sharing options...
LarryF Posted April 25, 2013 Report Share Posted April 25, 2013 I'm getting almost 5 hours in an SMa at 100mw with a single powerex 2700. My SMQv logically gets about twice that. I don't know if it's placebo or black magic, but the silver paste seems to increase battery life. The silver paste does really work and we have the measurements. We didn't do it originally because we didn't have field history on the units. Pouring dirt and sand on units here doesn't duplicate field use with the buildup of tarnish, dirt and oils. Best, Larry F Lectro Quote Link to comment Share on other sites More sharing options...
Mirror Posted April 25, 2013 Report Share Posted April 25, 2013 The silver paste does really work and we have the measurements. We didn't do it originally because we didn't have field history on the units. Pouring dirt and sand on units here doesn't duplicate field use with the buildup of tarnish, dirt and oils. Best, Larry F Lectro Speaking of that, Larry, What's the recommended way of removing that buildup of tarnish (or patina if one has a habit of walking around with ones nose in the air)? Quote Link to comment Share on other sites More sharing options...
LarryF Posted April 25, 2013 Report Share Posted April 25, 2013 Speaking of that, Larry, What's the recommended way of removing that buildup of tarnish (or patina if one has a habit of walking around with ones nose in the air)? As described on the instruction sheet, use a clean cloth on the threads of the thumbscrew and twist the thumbscrew. Do this until the cloth comes away clean. You could also use a little alcohol on the cloth. Use a q-tip or twisted cloth in the body threads until the cloth comes out clean. Again a little alcohol would help. Afterwards, add a pinhead of silver grease to the leading thread of the thumbscrew. It will spread around as it is used. You can briskly rub a clean cloth on the tiny ridge that contacts the battery. Don't use an eraser or anything even slightly abrasive. You don't want to remove the nickle-Teflon finish. Best, Larry F Lectro Quote Link to comment Share on other sites More sharing options...
Max Hirtenstein Posted April 25, 2013 Report Share Posted April 25, 2013 Thanks Larry I prefer to buy fair trade organic voodoo when I can. Quote Link to comment Share on other sites More sharing options...
Mirror Posted April 29, 2013 Report Share Posted April 29, 2013 As described on the instruction sheet, use a clean cloth on the threads of the thumbscrew and twist the thumbscrew. Do this until the cloth comes away clean. You could also use a little alcohol on the cloth. Use a q-tip or twisted cloth in the body threads until the cloth comes out clean. Again a little alcohol would help. Afterwards, add a pinhead of silver grease to the leading thread of the thumbscrew. It will spread around as it is used. You can briskly rub a clean cloth on the tiny ridge that contacts the battery. Don't use an eraser or anything even slightly abrasive. You don't want to remove the nickle-Teflon finish. Best, Larry F Lectro Thanks, Mirror Quote Link to comment Share on other sites More sharing options...
sergiofucchi Posted May 9, 2013 Report Share Posted May 9, 2013 Hi Larry, how often is it advisable to use the silver paste on the screw? Sergio Quote Link to comment Share on other sites More sharing options...
LarryF Posted May 9, 2013 Report Share Posted May 9, 2013 Hi Larry, how often is it advisable to use the silver paste on the screw? Sergio Hi Sergio, To quote the JWS seer, "It depends", mainly on how often it is used and the dust and dirt conditions. I'd re-clean with a dry rag, as in the instructions, about twice a year. The silver flakes from the paste get pressure "plated" into the threads. You aren't trying to lubricate the threads but to overcome dirt films and oxides of nickle with the silver film. Disclaimer: we don't have years of history on the silver paste. We just know it makes the conductivity better. We also know that the lithium grease that we were "accidentally" using was a bad idea. Accidentally, because no one knows why we even started with it. Best Regards, Larry Fisher Lectrosonics Quote Link to comment Share on other sites More sharing options...
ProSound Posted May 9, 2013 Report Share Posted May 9, 2013 Is the silver paste needed for MM 400 Transmitters as well? Quote Link to comment Share on other sites More sharing options...
LarryF Posted May 9, 2013 Report Share Posted May 9, 2013 Is the silver paste needed for MM 400 Transmitters as well? No. Much, much larger threads. Best, Larry F Lectro Quote Link to comment Share on other sites More sharing options...
sergiofucchi Posted May 13, 2013 Report Share Posted May 13, 2013 Thank You, Larry. Quote Link to comment Share on other sites More sharing options...
ProSound Posted May 15, 2013 Report Share Posted May 15, 2013 To add to Run tests: MM400C- Powerex 2700 4:15 mins charged up to 2565 according to charger MM400C Sanyo Black Eneloop 2500 4 :45 mins charged up to 2490 according to charger Going to run some more through Quote Link to comment Share on other sites More sharing options...
John Blankenship Posted May 16, 2013 Report Share Posted May 16, 2013 I'm getting right around 4 hours with the Sanyo XXX rechargeables in the SMv's set for 50mw. Tom Aren't the Sanyo's only double-x? I believe the triple-x ones are not allowed to be recharged by anyone under eighteen and must be shipped in a plain, brown wrapper. Quote Link to comment Share on other sites More sharing options...
Michael Wynne Posted May 22, 2013 Report Share Posted May 22, 2013 One of my smqv's seems to be prematurely giving me the "red" warning LED. I'm doing a timer test on two SMQV's simultaneously now which has been going about 10 hrs. The battery I'm using is the Energizer Ultimate Lithum, at 9 hours 30 minutes the suspect transmitter has the "red" LED on, the other unit is still "green" ...... EDIT UPDATE.... Transmitter LED flashing " RED" at 10 hrs other transmitter Green. Both units at 100mw The reason for the test is I've had the suspect transmitter give me the "red" LED prematurely, then after a power cycle it seemed to go back to "green" I'll keep doing testing until I determine there is an issue with the smqv which may require service. Larry any thoughts? Quote Link to comment Share on other sites More sharing options...
Michael Wynne Posted May 22, 2013 Report Share Posted May 22, 2013 Total run time on suspect SMQV before power loss with AA energizer lithium ultimates clocked at 10hrs, 40 mins. The other SMQV is still strong with green led at 12hrs. I'm thinking at this point that the suspect SMQV will definitely be taking a trip into Lectro for service, One thing I also noticed was this transmitter was running slightly warmer then the properly operating unit, which leads me to believe it is drawing more current then it's supposed too. Quote Link to comment Share on other sites More sharing options...
LarryF Posted May 22, 2013 Report Share Posted May 22, 2013 Total run time on suspect SMQV before power loss with AA energizer lithium ultimates clocked at 10hrs, 40 mins. The other SMQV is still strong with green led at 12hrs. I'm thinking at this point that the suspect SMQV will definitely be taking a trip into Lectro for service, One thing I also noticed was this transmitter was running slightly warmer then the properly operating unit, which leads me to believe it is drawing more current then it's supposed too. Hi Michael, Let me know when you are sending it in so I can keep an eye on. Helps keep my curiosity bump under control. Use larryf@lectrosonics.com Best Regards, Larry Fisher Lectrosonics Quote Link to comment Share on other sites More sharing options...
Michael Wynne Posted May 22, 2013 Report Share Posted May 22, 2013 Thanks Larry ! Will drop you a line when I send off which will most likely be Friday. I appreciate you guys. M Quote Link to comment Share on other sites More sharing options...
studiomprd Posted May 22, 2013 Report Share Posted May 22, 2013 " the suspect SMQV will definitely be taking a trip into Lectro for service, " I'm sure glad we discussed this... Quote Link to comment Share on other sites More sharing options...
Jack Norflus Posted May 22, 2013 Author Report Share Posted May 22, 2013 One of my smqv's seems to be prematurely giving me the "red" warning LED. I'm doing a timer test on two SMQV's simultaneously now which has been going about 10 hrs. Interesting-I've just noticed one of my smqv has been getting significantly shorter run time. I thought it might be a bad batch of batteries and I haven't had a chance to do a full test yet - I wonder if this might be related. Quote Link to comment Share on other sites More sharing options...
Blas Kisic Posted May 23, 2013 Report Share Posted May 23, 2013 Once again, the JWS forums are dripping with true wisdom and useful information. I'm preparing for a five-week documentary shoot in June, which will test the range and longevity of transmitter batteries, and this thread couldn't have come at a better time: I've confirmed a number of things, and I've learned quite a few, very important, things as well. Thank you, guys! BK Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.