James Arnold Posted February 23, 2015 Report Share Posted February 23, 2015 Obviously this would need help from Lectro themselves, but any chance of a dweedle tone to change the LF cut? Quote Link to comment Share on other sites More sharing options...
Wandering Ear Posted February 23, 2015 Report Share Posted February 23, 2015 I'm curious what prompts you to change the low cut? I usually set it once and forget it. Quote Link to comment Share on other sites More sharing options...
James Arnold Posted February 24, 2015 Report Share Posted February 24, 2015 Wind. Over buried lavs. Quote Link to comment Share on other sites More sharing options...
tonetripper Posted February 24, 2015 Report Share Posted February 24, 2015 Thanks Quote Link to comment Share on other sites More sharing options...
NewEndian Posted February 24, 2015 Report Share Posted February 24, 2015 Unfortunately, the remote control can't configure a setting unless Lectrosonics makes that setting accessible by remote control. There is no remote control capability for Low Cut Filter. Quote Link to comment Share on other sites More sharing options...
Simon Paine Posted February 25, 2015 Report Share Posted February 25, 2015 Love the app. Was wondering if its possible to add custom names to the channels ? instead of just channel 1 channel 2 etc, could replace with character names etc. Thanks. Quote Link to comment Share on other sites More sharing options...
NewEndian Posted February 25, 2015 Report Share Posted February 25, 2015 Hi Simon. Transmitter names can be changed in the TX details screen where you configure the frequency. Quote Link to comment Share on other sites More sharing options...
NewEndian Posted February 25, 2015 Report Share Posted February 25, 2015 I totally blanked on which app we were talking about. Responses tomorrow Quote Link to comment Share on other sites More sharing options...
Chris R Posted February 25, 2015 Report Share Posted February 25, 2015 Is there a way to change volume by up or down increments rather than a set number? Kind of like how you would do it manually? Quote Link to comment Share on other sites More sharing options...
NewEndian Posted February 25, 2015 Report Share Posted February 25, 2015 Was wondering if its possible to add custom names to the channels ? instead of just channel 1 channel 2 etc, could replace with character names etc. It is possible, but it would require a non-trivial amount of work and I have other priorities for things I'm working on. And it would overlap with FreqFinder's functionality and FreqFinder is meant to be the transmitter management app. Not that it's out of the question, just that it's not high on my priorities for features. I hope you understand. Quote Link to comment Share on other sites More sharing options...
NewEndian Posted February 25, 2015 Report Share Posted February 25, 2015 Is there a way to change volume by up or down increments rather than a set number? Kind of like how you would do it manually? Lectrosonics has not provided that remote control functionality in their SMs. I believe the reasoning behind it is that there's no concrete feedback on whether a remote control message was received. Lectrosonics recommends that you execute the tone multiple times to be sure. That wouldn't work so well with incremental changes. Quote Link to comment Share on other sites More sharing options...
LarryF Posted February 25, 2015 Report Share Posted February 25, 2015 Obviously this would need help from Lectro themselves, but any chance of a dweedle tone to change the LF cut? Hi James, OK. We will add six dweedle tones for the six roll-offs to the dweedable units starting April 1, 2015. This will be the SM series, LT, and WM transmitters plus new transmitters as they come. The firmware can be retrofitted here at Lectro on older units. There will be a charge for opening and programming the units with a discount for multiple units. Something like $100 for the first unit and $50 for each additional unit on the same repair order. WM's will be $120 for the first unit and $65 for additional WM's. If you or a warranty repair station have the capability of programming the transmitters using our LectroLink programmer, the firmware is free. The SM series requires LectroLink. The LT can be easily programmed from a computer into the USB port. The WM is a special case to be done here only since it must be resealed and pressure tested to maintain its water tightness. Please don't hold me to dates and costs since we have just started working on this but this should be close. We will make the tones available to NewEndian as soon as we have tested them out. Best Regards, Larry Fisher Lectrosonics Quote Link to comment Share on other sites More sharing options...
Bob Schuck Posted February 25, 2015 Report Share Posted February 25, 2015 April 1st, 2015? Quote Link to comment Share on other sites More sharing options...
LarryF Posted February 25, 2015 Report Share Posted February 25, 2015 April 1st, 2015? Obviously, our notoriety is widespread. LEF Quote Link to comment Share on other sites More sharing options...
taylormadeaudio Posted February 26, 2015 Report Share Posted February 26, 2015 Oh SNAP! Quote Link to comment Share on other sites More sharing options...
James Arnold Posted March 3, 2015 Report Share Posted March 3, 2015 Hi James, OK. We will add six dweedle tones for the six roll-offs to the dweedable units starting April 1, 2015. This will be the SM series, LT, and WM transmitters plus new transmitters as they come. The firmware can be retrofitted here at Lectro on older units. There will be a charge for opening and programming the units with a discount for multiple units. Something like $100 for the first unit and $50 for each additional unit on the same repair order. WM's will be $120 for the first unit and $65 for additional WM's. If you or a warranty repair station have the capability of programming the transmitters using our LectroLink programmer, the firmware is free. The SM series requires LectroLink. The LT can be easily programmed from a computer into the USB port. The WM is a special case to be done here only since it must be resealed and pressure tested to maintain its water tightness. Please don't hold me to dates and costs since we have just started working on this but this should be close. We will make the tones available to NewEndian as soon as we have tested them out. Best Regards, Larry Fisher Lectrosonics Thanks Larry! Hopefully my UK service centre (Raycom) will be able to undertake the mod. Quote Link to comment Share on other sites More sharing options...
mulluysavage Posted March 3, 2015 Report Share Posted March 3, 2015 What's LectroLink? Quote Link to comment Share on other sites More sharing options...
brando w Posted October 26, 2015 Report Share Posted October 26, 2015 Hi, anyone having problems with LectroRM and LT? Using the LectroRM to change the freq, it changes my LT to the assigned number but it sets it to Blk 24 even though I selected Blk 25 or 26 on it. Quote Link to comment Share on other sites More sharing options...
bralleput Posted October 26, 2015 Report Share Posted October 26, 2015 Brando do you use the latest version of LectroRM? Had the same problem using the RM on my new SSM's: latest version did the trick! Quote Link to comment Share on other sites More sharing options...
brando w Posted October 26, 2015 Report Share Posted October 26, 2015 Oops. Have only been using with the SMQVs all this while. Didn't realise that I must select the LT blocks like C1-24 or C1-25. Quote Link to comment Share on other sites More sharing options...
mark kirchner Posted February 21, 2016 Report Share Posted February 21, 2016 Having trouble using the LectroRM app with my Lectrosonics LT (A1) transmitters. The sleep, audio gain and lock modes respond perfectly to the dweedle tone, but the frequency mode is not working properly in blocks 19 & 20. In block 470 all frequency functions work great. When I select a new frequency, as example, block 20 / 0C-513.200 (see photo) the transmitter will select the block 470. Transmitter S# 674 firmware 1.06 Transmitter S# 860 firmware 1.07 Both purchased December 2015 and New Endian LectroRM app (ISO) purchased in January of 2016. Tram TR-50 Microphone Any ideas on how to correct the problem would be well appreciated. Thanks, Mark Quote Link to comment Share on other sites More sharing options...
mark kirchner Posted February 21, 2016 Report Share Posted February 21, 2016 I figured it out. It took a moment until "Brando W" words sunk in. I just needed to use the A1-20, A1-19 or A1-470 setting on the app. All good now, my problem was I was still thinking in blocks. Quote Link to comment Share on other sites More sharing options...
Olle Sjostrom Posted February 21, 2016 Report Share Posted February 21, 2016 I have an issue with SMa transmitters and the app in Android; when changing levels in the app, the level indicated in the app is reflected on the transmitter, but seven steps below that of the app. I.e if I choose level 20 on the app, the transmitter will show level 13. The app has worked perfectly before so this is something new that's happened like maybe a week ago. I'm using a HTC one m7 with a custom rom (figuring this might be a culprit, but that doesn't explain why it's worked before). Thanks for two awesome apps! Keep up the good work Quote Link to comment Share on other sites More sharing options...
NewEndian Posted February 21, 2016 Report Share Posted February 21, 2016 Mea culpa, Olle. I submitted a fix to Google Play store. Should be available in the next couple hours. Had to do with the Enable/Disable Tones setting that I added a while ago. Thank you for pointing it out! Quote Link to comment Share on other sites More sharing options...
Olle Sjostrom Posted February 21, 2016 Report Share Posted February 21, 2016 Oh great! Thanks again! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.