Search the Community
Showing results for tags 'matte'.
Found 1 result
How to matte a new shiny Ambient boompole
Allen Williams posted a topic in Do It YourselfAs you may know, Ambient changed the design of their QP line of boom poles last year from matte black coated carbon fiber to a shiny weave of carbon fiber. Since buying a new QP-4140 last year, I've run into a couple of problems with it reflecting bright light sources that hit it directly. Normally you can cross a bright light source as long as it doesn't cast a shadow into frame or change the light level but the new design reflects light so this isn't always possible. In the attached pictures, there was a Source 4 to my right firing into the cabinet on the left and I was booming someone under it. If I were to barely break the beam of light, a ring of light reflected off the surface of the boom into the room which was very noticeable (pictured). I called Ambient in Germany, asked numerous people on set, other fellow boom slingers and even posted in the jwsound Facebook group asking for ideas on how I can dull the surface of the boom but thought I'd try here too. Suggestions ranged from trying to sand the boom with 600 grain (after a lot of sanding with many pieces of sandpaper it took the shiny finish off it but the weave still reflects) and sanding it with #0000 steel wool (if it did anything, I couldn't see it) to the ridiculous such as wrapping it in paper tape. If you have any thoughts or experience with such things, I'd appreciate the input. I'm hoping the solution isn't to pay to have it professionally matte painted with a non-chipping coating or something (if there is such a thing that would work) but I'll take the time to try a solution if might help. Obviously, I'm trying to not destroy the pole. Thanks, in advance, for your input.