tong

How do you like the new porta brace?

it's a nice bag to have for the lightweight nature. but same problem as most bags for me, troubleshooting of inputs 1-6 is a problem I foresee since the Nomad has its connectors buried at the bottom.

The AO1.5x is a tight fitting for 2 rx and 4 tx in the main compartment. I will b able to fit in another rx in that empty slot but the tx will hv to be stored somewhere else in the bag.

Sent from my iPhone using Tapatalk

how are you keeping the excess mic cables tidy on the wisycom transmitter when mic'ing up the talents? i used a rubber band to secure the excess cables but it is messy when i need to excess to the settings of the transmitter or change batteries. It used to work well on lectros..

I think I'm done for awhile..

Zaxcom 12 with 4 channel wisycom wireless set , ERX for IFB.

Sent from my iPhone using Tapatalk

James, XN3 now doing a good deal for AO bags, check it out!

Sent from my iPhone using Tapatalk

version 1, still working towards a neater and tidier setup.

The AO1.5x still seems a little tight with the Nomad.. Perhaps a AO-2 will be more roomy?

Sent from my iPhone using Tapatalk

i used to use QC frm Ktek. Failed on me couple of times, it depends on a nut to secure the base and it easily comes loose every few months. Takes a coin and a Gerber to release the nut from the base.. ever since i changed to Ambient, Base never leaves the boom pole tip.

I've been oggling at pictures on the internet but I can't get the information that i need. Does the ktek klassic's Bottom XLR exit and right angle XLR exit share the same TA3M connection internally, would i have to change the cable kit if i were to decide to switch my pole to a bottom XLR configuration?

One of my Sennheiser G2 EK500-C #501188 has been misplaced, if anyone see it floating around on For Sale forums or Ebay, please kindly let me know asap!

even if signal is not distorted in the 32-bit recording because of Neverclip, when i mirror it to 24-bit audio there is a chance it may distort or clip bcos of the conversion?

Excellent craft Pascal! You brought DIY to a whole new level!

Hi,

This is pretty urgent. just did an firmware update on the VR FIeld Narrow band unit and it fail halfway. now the unit refuses to power up. any way to do a master reset without sending it back to the mothership? have a project coming up very soon that needs to use it.

Is there any Timecode jam to the camera?

Meet the brothers...

i'm all set for this career for the next decade.

Zack, so the acl-202 (not CT) doesnt't?

Hi all, I was browsing on eBay and spotted some ambient lockits acl202 on sale and am interested. However after researching I realize there are different models with the same number , acl202 and acl202ct. The acl202 doesn't seem to support hd tri level sync, I like to know if my findings are true. I would prefer to have a lock it box that works with any modern cameras just in case one day I require that specification..

Thanks!

i believed the Pegz-3 extra large petrol or the AO-4 works. used to work with vrfield and 442 in it. the ao-4 will fit a 788/cl8 and vrfield but it will be a tight fit

Only issues I have with mine is its sensitivity to moisture... Here in sunny Singapore. in and out of an air conditioned area, and it outputs nothing but hums and "dropouts". Scrimping and saving for a 8050 now...

yes Jack it makes more sense to go for the 12 now. But I'm reluctant bcos of the downtime - local dealer in Singapore last mention it takes 12 weeks for a trip to mother ship..

I would still like to upgrade my 6 to a 8.. unless the 10 offers the same functionalities as the 8 (USB support and mix tracks). but the 8 is totally missing frm the website?

Is the fan meant to cool down the rig, or you;)?

I just bought the Nomad-6 and they come out with this product -.-

Just wondering if the calculation of frequencies work for Lectro 201s, 401s as well? Since they do not have a tracking front end like the 411s.

The only real issue I see with this bag, as with all portabrace bags with the RM-Multi pouch is the sag factor. There isn't a ring on the main body part to help cable tie the RM-multi to the bag.

That is also part of my concerns as well.

Has anyone started using the AO-Flex Porta Brace Series? Been researching for a possible new bag for my equipment.. I am already suspicious on the practicality of having an adjustable ring where my harness will be attached to because I own the old Petrol PEGz-1 which also has this adjustable d-hook system and it didn't really work very well for me.

Would like to gather some feedback from field users.

Thanks in advance!

http://www.bhphotovideo.com/c/product/787090-REG/Porta_Brace_AO_FLEX4_AO_FLEX4_Audio_Organizer_Blue.html

Yes, I second that notion. Hopefully, the app will work on Nomad 6 as well