cjh Posted August 8, 2022 Report Share Posted August 8, 2022 Hello! Pushing my legacy zax system to its limits, all going well but question zaxnet control of trx’s 9 & 10… Have 10 channels of zax witeless, using Deva faders for zaxnet trim of trx’s 1 - 8, so far can’t get zaxnet trim control of trx’s 9 & 10. Channels 1-8 are using digital inputs, trx 9 & 10 are using analogue inputs 1&2. zax RX’s are QRX200’s ganged together via serial ports to a QRX235. Remote control also works from individual RX’s for channels 1-8, the last QRX for trx’s 9 & 10 doesn’t want to play ball and remote changing of gain and freq not currently working via qrx ? Any legacy zax users who have been here before keen to hear your thoughts. Given how the mix 12 to Deva configuration works I can understand the zaxnet remote for more than 8 trx’s may not be possible but I presume the serial port ganged QRX’s should be able to handle more that 8 TRX..? All zax groups and unit numbering is double checked and correct. thank you! chris. Quote Link to comment Share on other sites More sharing options...
cjh Posted August 9, 2022 Author Report Share Posted August 9, 2022 Sorted! Further tests found one my qrx serial outputs was not working, swoped unit out and all well. c. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.