.png.2bf2d6f7b89ab88ba7729612d7a505f1.png)
Search the Community
Showing results for tags 'hops'.
Found 5 results
-
Let's talk about it! What setups do y'all use? What cameras have give you the most headaches? Timecode/scratch/mix? How do you tackle it?
-
Howdy People!, I have a set of Audio Limited 2040s which have been replaced buy my new Lectros [smqv and sbr] and i am considering using the 2040s as a wireless link to camera. Now i dont do very much wireless to camera so i dont have very much access to fiddle with a camera but i was wondering if anyone here uses the 2040s for that purpose and what tips and methods you peeps recomend. I have tried to find something on the site but i cant seem to find it but am more than happy to read off another link if someone knows where it is. Just so you know i am using a 744t 442 combo with now 2 lectros and 2 2040s. I have the appropriate cables and have tested them and they seem to be all good. Thanks in advance!
-
I'm prepping to do an outdoor run and gun style reality shoot, and am looking for a good solution to use my SRB recievers on their EX3 cameras. In the past I've done the fanny pack setup, but this show is going to involve a lot of running through the woods, etc and I need something sturdy that won't snag on things so easily. Suggestions? Do brackets for SR receivers exist? I appreciate your input!
-
I'd be interested to see how many of you have ceased carrying a lengthy snake attached to your bag, to make your kit a little lighter and more compact. I know I used to have one always attached in the event of a major catastrophe befalling the hops, so I could quickly plug in. Worth doing as a fail-safe, or, lighten your load and trust the technology?
-
Hey guys. I recently purchased a Lectro SRa for use as a camera hop, and took it out for the first time a few days ago. It was fed by 2 SMQV's, which in turn were fed by the line level outs of my 788. I left the gain of the 788 output at -4dB and set both the tx's and rx gain to zero. When I did this, I noticed that the metering on the SRa seemed really hot, while the meters on the tx's were barely hitting above -20. Did I get something mixed up with the gain staging here, or am I just misreading meters on the SRa (I haven't found anything in the manual about the meter scale)? Seems like the metering on the tx's should be more or less identical to the rx, assuming that there's no additional gain applied to the rx. Right?
