LDstudios Posted May 28, 2023 Report Share Posted May 28, 2023 Hi all, I need to wired up a bunch of Sennheiser HSP-4 headsets for 5-pin Lectrosonics. I have done plenty of 2-wire Sennheiser lavs, but when I popped the lid on these headsets I found three wires (gasp!). Red, Blue and Copper shield. It isn't something I am familiar with. Is it just a case of wiring to figure 11? (1 = copper, 3 = blue, 5 = red)? Quote Link to comment Share on other sites More sharing options...
rich Posted May 28, 2023 Report Share Posted May 28, 2023 i would give that a go. if that doesnt work, swap the red and blue wires. i think fig 2 could work too, but you'll need to connect one of the colour wires to pin 1 Quote Link to comment Share on other sites More sharing options...
Conor Posted May 31, 2023 Report Share Posted May 31, 2023 1 - Blue & shield 2 - Bridge to 4 3 - Red 4 - Bridged to 2 5 - Empty Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.