nicoproson Posted October 28, 2019 Report Posted October 28, 2019 Hello, I'm having an issue with a SWIT NP-1 battery (S-8073N). I left by accident an MCR42 receiver on, until the battery got fully discharged. Since then the battery won't charge anymore. Is there anything I can try to bring it back to life or have I damaged the internal circuit board for good ? Thanks, Nicolas Quote
Constantin Posted October 28, 2019 Report Posted October 28, 2019 I have the same situation. I have a bunch of no-name NP-1s and when they die in a similar way, I can bring them back in my IDX KL4 charger. Their own Axcom charger can’t revive them. However, my Swit batteries will not charge in the IDX charger and this remain dead. Now we need a charger like the IDX but for Swit batteries... Quote
Solid Goldberger Posted October 28, 2019 Report Posted October 28, 2019 Not sure which charger you are using for the Swit batteries, but if your batteries are the ones with the P-tap, try using those chargers that utilize that input. If you don't have one, they're very cheap, and a great addition to any travel kit that uses those batteries. Quote
nicoproson Posted October 29, 2019 Author Report Posted October 29, 2019 Thank you, I'm going to try the D-tape charger. Quote
.jpg.4eb7dd6bddc20cbf33e83fcb89907211.thumb.jpg.f54f5d91d835c483616aee3db04ac5b5.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.